Other Function Settings, Exposure Adjustment | Sharp AR-C160

KEY OPERATOR PROGRAMS

OTHER FUNCTION SETTINGS

The programs of this category are used to adjust various settings of copier functions. These programs can be selected by pressing the “OTHER FUNCTION SETTINGS” key and then selecting the desired program key.

Key Operator Code Number Change

See page 2, KEY OPERATOR CODE NUMBER.

Exposure Adjustment

Use this program to lighten or darken copies in the automatic exposure mode. The factory setting is level 3 for both color copying and black/ white copying.

When the “EXPOSURE ADJUSTMENT” key is pressed, the following display will appear.

KEY OPERATOR PROGRAMS
EXPOSURE ADJUSTMENT	OK
AUTO EXPOSURE CAN BE ADJUSTED.
COLOR
B/W

1.Adjust the exposure using the and keys.

●The exposure level can be adjusted for color copying and black/ white copying respectively.

2.Press the “OK” key.

Toner Save Mode (B/W)

The toner save mode will reduce toner consumption by approxi- mately 10% in black/white copying regardless of exposure mode and original image type. Copies will be lighter but still adequate for general use. Selection of this mode does not affect color copying.

To turn on the toner save mode, press the check box of “TONER SAVE MODE (B/W)” to display a check mark in the check box.

To turn off the toner save mode, press the check box of this program again to clear the check mark in the check box.

18

Image 20

Sharp AR-C160 manual Other Function Settings, Key Operator Code Number Change, Exposure Adjustment, Toner Save Mode B/W

Contents

AR-C160 Page Contents Press the Custom Settings key Enter 0 five times using the 10-key pad KEY Operator Code Number KEY Operator Programs KEY Operator Programs Printer KEY Operator Programs optional Press the Copier key or the Printer key on Touch panel Using the key operator programsEnter the key operator code number Follow instructions for the program Select the desired category on the touch panelPress the key of the desired program on the touch panel Press the OK key to exit the program Auditing ModeAccount Control Press the upper OK key to exit the program Number of Copies per AccountPress the key to advance through the accounts Billing by Account Resetting Account To reset all accountsTo reset a single account Press the key of an account to be reset Account Number Control To register accountsTo delete accounts Press the Enter key Price/Copy Setting To change an account numberTo print all registered account numbers Press the Print key Similarly enter the prices for price codes #2 to #4 To set a limit for all accoounts Account Limit SettingTo set a limit Account Number Security Other Function Settings Exposure AdjustmentToner Save Mode B/W Adjust the exposure using the and keys Add or Change Extra Preset Ratios Setting a Maximum Number of CopiesInput the number using the 10-key pad Use the and keys to set the desired copy ratio Adjust the value for each side using the and keys Initial Margin Shift SettingErase Width Adjustment Initial Status Setting To establish new initial settingsTo return to the factory default settings Press the Return to the Factory Default SETTINGS. key Initial Color Balance Setting Size Setting for Extra Select a paper tray on the touch panel Select a paper size for Extra settingRequire Key Operator Code Stream Feeding Mode Override Sorter Bin Capacity Limit Timer Settings Sleep Mode SettingAuto Clear Setting Enter the time interval using Keys Press the OK key Set the time using the and keys Press the OK key Preheat Mode SettingMessage Time Setting ENABLE/DISABLE Settings Disabling of Beep When Keys TouchedDisabling of Auto Tray Switching Disabling of Auto Paper Selection Disabling of Bypass-Tray in Duplex Copy Disabling Deletion of Job ProgramsDisabling of Document Feeder Disabling of Duplex Copying Disabling of Stapler Disabling of Covers ModeDisabling of PC/Modem Access Disabling of Sleep Mode Disabling of Pre-scan in B/W Copy Other Programs Total CountProgram List Printout Press the Copier key Auto Color Calibration Press the Execute key Printer KEY Operator Programs Enable Bypass-Tray Size DetectionEnable Bypass-Tray Type Detection Prohibit Auto Tray Switching Prohibit Bypass-Tray Selection KEY Operator Assistance Call Sharp Corporation