KEY Operator Assistance Call | Sharp AR-C160 specification

KEY OPERATOR ASSISTANCE CALL

When the copier is in need of service or care not usually performed by general users, the copier will stop and one of the following messages listed below will appear.

Message	Remedy

CHECK STAPLER POSITION OR STAPLE JAM.	See page 7-11 of the Operation Manual for staple jam
	removal. If the trouble cannot be easily remedied, use key
	operator program “DISABLING OF STAPLER” (page 29) to
	prevent the use of the stapler.
	Contact your authorized Sharp Service Center for service.

SORTER IS OUT OF SERVICE. PRESS [CA] TO CANCEL JOB.

Contact your authorized Sharp Service Center for service. (This message will appear when the optional staple sorter (AR-SS2) malfunctions.)

DUPLEX SYSTEM IS OUT OF SERVICE.	Use key operator program “DISABLING OF DUPLEX
	COPYING” (page 28) to prevent the use of the optional
	duplex system. Contact your authorized Sharp Service
	Center for service.

THE DOCUMENT FEEDER IS OUT OF SERVICE. PRESS [CA] TO CANCEL JOB.

Use key operator program “DISABLING OF DOCUMENT FEEDER” (page 28) to prevent the use of the optional document feeder. Contact your authorized Sharp Service Center for service.

SELECTED PAPER TRAY IS OUT OF SERVICE.	Contact your authorized Sharp Service Center for service.
PLEASE SELECT ANOTHER PAPER TRAY.

CALL FOR SERVICE.	With this message, an alphanumeric code will appear to
CODE: -	indicate a malfunction has occurred which cannot be
	corrected by the key operator.
	Contact your authorized Sharp Service Center for service.
	Be sure to report the alphanumeric code information as
	well. This will enable the Service Center to prepare to
	correct the malfunction associated with the code.

35

Image 37

Sharp AR-C160 manual KEY Operator Assistance Call

Contents

AR-C160 Page Contents Enter 0 five times using the 10-key pad Press the Custom Settings key KEY Operator Code Number KEY Operator Programs KEY Operator Programs Printer KEY Operator Programs optional Enter the key operator code number Using the key operator programsPress the Copier key or the Printer key on Touch panel Press the key of the desired program on the touch panel Select the desired category on the touch panelFollow instructions for the program Account Control Auditing ModePress the OK key to exit the program Press the key to advance through the accounts Number of Copies per AccountPress the upper OK key to exit the program Billing by Account To reset all accounts Resetting AccountTo reset a single account Press the key of an account to be reset To register accounts Account Number ControlTo delete accounts Press the Enter key To change an account number Price/Copy SettingTo print all registered account numbers Press the Print key Similarly enter the prices for price codes #2 to #4 To set a limit Account Limit SettingTo set a limit for all accoounts Account Number Security Exposure Adjustment Other Function SettingsToner Save Mode B/W Adjust the exposure using the and keys Setting a Maximum Number of Copies Add or Change Extra Preset RatiosInput the number using the 10-key pad Use the and keys to set the desired copy ratio Erase Width Adjustment Initial Margin Shift SettingAdjust the value for each side using the and keys To establish new initial settings Initial Status SettingTo return to the factory default settings Press the Return to the Factory Default SETTINGS. key Size Setting for Extra Initial Color Balance Setting Require Key Operator Code Select a paper size for Extra settingSelect a paper tray on the touch panel Override Sorter Bin Capacity Limit Stream Feeding Mode Sleep Mode Setting Timer SettingsAuto Clear Setting Enter the time interval using Keys Press the OK key Message Time Setting Preheat Mode SettingSet the time using the and keys Press the OK key Disabling of Beep When Keys Touched ENABLE/DISABLE SettingsDisabling of Auto Tray Switching Disabling of Auto Paper Selection Disabling Deletion of Job Programs Disabling of Bypass-Tray in Duplex CopyDisabling of Document Feeder Disabling of Duplex Copying Disabling of PC/Modem Access Disabling of Covers ModeDisabling of Stapler Disabling of Pre-scan in B/W Copy Disabling of Sleep Mode Total Count Other ProgramsProgram List Printout Press the Copier key Press the Execute key Auto Color Calibration Enable Bypass-Tray Type Detection Enable Bypass-Tray Size DetectionPrinter KEY Operator Programs Prohibit Bypass-Tray Selection Prohibit Auto Tray Switching KEY Operator Assistance Call Sharp Corporation