KEY Operator Programs | Sharp AR-C160 specification

KEY OPERATOR PROGRAMS

Category	Program Name	Function	Page No.

	Transfer Belt Position	Switches the transfer belt to either the B/W side or	21
		the color side.

	Initial Color Balance	Sets the initial color balance settings.	22
	Setting

	Size Setting for	Sets a paper size in each tray with [EXTRA] setting.	22
	[EXTRA]

	Require Key	Prevents the copier from being started by people	23
	Operator Code	other than key operator.

	Stream Feeding	Enables the stream feeding mode for copying	24
	Mode	from the optional document feeder.

	Override Sorter Bin	Cancels limit control of operation in case of bin	24
	Capacity Limit	capacity overflow of an optional staple sorter.

Timer Settings	Sleep Mode	Sets a time interval after which the copier enters the	25
	Setting	sleep mode after copying is completed.

	Auto Clear Setting	Sets a time interval after which the copier returns	25
		to the initial settings.

	Preheat Mode	Sets the time that elapses before the copier enters	26
	Setting	the preheat mode after copying is completed.

	Message Time	Sets the length of time that messages are displayed.	26
	Setting

Enable/Disable	Disabling of Beep	Enables or disables sounding of beep when keys	27
Settings	When Keys Touched	are touched.

	Disabling of Auto	Prevents automatic paper selection.	27
	Paper Selection

	Disabling of Auto	Prevents automatic switching between the paper	27
	Tray Switching	trays.

	Disabling of	Prohibits the use of the bypass tray during	28
	Bypass-Tray	duplex copying. (Duplex copying can be performed
	in Duplex Copy	when an optional duplex module is installed.)

	Disabling	Prevents stored programs from being replaced or	28
	Deletion of Job	deleted.
	Programs

	Disabling of	Prevents the use of the optional document feeder	28
	Document Feeder	when it malfunctions.

	Disabling of Duplex	Temporarily prevents the optional duplex system from	28
	Copying	operating when it malfunctions. Allows the use of the
		copier but not the duplex system.

5

Image 7

Sharp AR-C160 manual KEY Operator Programs

Contents

AR-C160 Page Contents Enter 0 five times using the 10-key pad Press the Custom Settings key KEY Operator Code Number KEY Operator Programs KEY Operator Programs Printer KEY Operator Programs optional Enter the key operator code number Using the key operator programsPress the Copier key or the Printer key on Touch panel Press the key of the desired program on the touch panel Select the desired category on the touch panelFollow instructions for the program Account Control Auditing ModePress the OK key to exit the program Press the key to advance through the accounts Number of Copies per AccountPress the upper OK key to exit the program Billing by Account Press the key of an account to be reset Resetting AccountTo reset all accounts To reset a single account Press the Enter key Account Number ControlTo register accounts To delete accounts Press the Print key Price/Copy SettingTo change an account number To print all registered account numbers Similarly enter the prices for price codes #2 to #4 To set a limit Account Limit SettingTo set a limit for all accoounts Account Number Security Adjust the exposure using the and keys Other Function SettingsExposure Adjustment Toner Save Mode B/W Use the and keys to set the desired copy ratio Add or Change Extra Preset RatiosSetting a Maximum Number of Copies Input the number using the 10-key pad Erase Width Adjustment Initial Margin Shift SettingAdjust the value for each side using the and keys Press the Return to the Factory Default SETTINGS. key Initial Status SettingTo establish new initial settings To return to the factory default settings Size Setting for Extra Initial Color Balance Setting Require Key Operator Code Select a paper size for Extra settingSelect a paper tray on the touch panel Override Sorter Bin Capacity Limit Stream Feeding Mode Enter the time interval using Keys Press the OK key Timer SettingsSleep Mode Setting Auto Clear Setting Message Time Setting Preheat Mode SettingSet the time using the and keys Press the OK key Disabling of Auto Paper Selection ENABLE/DISABLE SettingsDisabling of Beep When Keys Touched Disabling of Auto Tray Switching Disabling of Duplex Copying Disabling of Bypass-Tray in Duplex CopyDisabling Deletion of Job Programs Disabling of Document Feeder Disabling of PC/Modem Access Disabling of Covers ModeDisabling of Stapler Disabling of Pre-scan in B/W Copy Disabling of Sleep Mode Press the Copier key Other ProgramsTotal Count Program List Printout Press the Execute key Auto Color Calibration Enable Bypass-Tray Type Detection Enable Bypass-Tray Size DetectionPrinter KEY Operator Programs Prohibit Bypass-Tray Selection Prohibit Auto Tray Switching KEY Operator Assistance Call Sharp Corporation