Initial Color Balance Setting | Sharp AR-C160 guide

KEY OPERATOR PROGRAMS

Initial Color Balance Setting

Color balance settings that have been adjusted using the special function of “Color Balance” explained on page 3-22 of the Operation Manual can be called up and set as initial color balance settings* by storing them ahead of time in a job program (page 2-18 of the Operation Manual). Use this feature when you want to repeatedly use settings for a favorite color or for correction when a change occurs in the color balance.

*Preset values displayed when you select the special function of “Color Balance”. The factory default settings are the “0” position for all eight levels of each color.

When the “INITIAL COLOR BALANCE SETTING” key is pressed, the following display will appear.

KEY OPERATOR PROGRAMS
INITIAL COLOR BALANCE SETTING		OK
PRESS PROGRAM NUMBER IN WHICH COLOR BALANCE
PROGRAM IS REGISTERED.
1	2	3
4	5	6
7	8	9

RETURN TO THE FACTORY DEFAULT

SETTING.

1.Press the job program number key in which the color balance settings have been stored.

●If a job program number key is pressed that does not have color balance settings, a warning message will appear.

●To return color balance settings that have been stored as initial settings to the factory default settings (the “0” position for all eight levels of each color), press the “RETURN TO THE FACTORY DEFAULT SETTINGS” key.

2.Press the “OK” key.

●The color balance settings stored in the job program number key that was pressed are set as the initial settings.

Size Setting for [EXTRA]

This program allows the paper size to be set for each paper tray. The setting through this program will only be effective when the paper size indicator of the paper tray is set to [EXTRA].

When the “SIZE SETTING FOR [EXTRA]” key is pressed, the following display will appear.

22

Image 24

Sharp AR-C160 manual Initial Color Balance Setting, Size Setting for Extra

Contents

AR-C160 Page Contents Press the Custom Settings key Enter 0 five times using the 10-key pad KEY Operator Code Number KEY Operator Programs KEY Operator Programs Printer KEY Operator Programs optional Using the key operator programs Enter the key operator code numberPress the Copier key or the Printer key on Touch panel Select the desired category on the touch panel Press the key of the desired program on the touch panelFollow instructions for the program Auditing Mode Account ControlPress the OK key to exit the program Number of Copies per Account Press the key to advance through the accountsPress the upper OK key to exit the program Billing by Account Resetting Account To reset all accountsTo reset a single account Press the key of an account to be reset Account Number Control To register accountsTo delete accounts Press the Enter key Price/Copy Setting To change an account numberTo print all registered account numbers Press the Print key Similarly enter the prices for price codes #2 to #4 Account Limit Setting To set a limitTo set a limit for all accoounts Account Number Security Other Function Settings Exposure AdjustmentToner Save Mode B/W Adjust the exposure using the and keys Add or Change Extra Preset Ratios Setting a Maximum Number of CopiesInput the number using the 10-key pad Use the and keys to set the desired copy ratio Initial Margin Shift Setting Erase Width AdjustmentAdjust the value for each side using the and keys Initial Status Setting To establish new initial settingsTo return to the factory default settings Press the Return to the Factory Default SETTINGS. key Initial Color Balance Setting Size Setting for Extra Select a paper size for Extra setting Require Key Operator CodeSelect a paper tray on the touch panel Stream Feeding Mode Override Sorter Bin Capacity Limit Timer Settings Sleep Mode SettingAuto Clear Setting Enter the time interval using Keys Press the OK key Preheat Mode Setting Message Time SettingSet the time using the and keys Press the OK key ENABLE/DISABLE Settings Disabling of Beep When Keys TouchedDisabling of Auto Tray Switching Disabling of Auto Paper Selection Disabling of Bypass-Tray in Duplex Copy Disabling Deletion of Job ProgramsDisabling of Document Feeder Disabling of Duplex Copying Disabling of Covers Mode Disabling of PC/Modem AccessDisabling of Stapler Disabling of Sleep Mode Disabling of Pre-scan in B/W Copy Other Programs Total CountProgram List Printout Press the Copier key Auto Color Calibration Press the Execute key Enable Bypass-Tray Size Detection Enable Bypass-Tray Type DetectionPrinter KEY Operator Programs Prohibit Auto Tray Switching Prohibit Bypass-Tray Selection KEY Operator Assistance Call Sharp Corporation