Auto Color Calibration, Press the Execute key | Sharp AR-C160

KEY OPERATOR PROGRAMS

Auto Color Calibration

The Auto Color Calibration program enables automatic color gradation correction when it becomes misadjusted.

NOTE:

The color gradation may not be sufficiently corrected after one correction cycle. If so, a re-execution of the program may be necessary.

This program can be selected by pressing the “AUTO COLOR

CALIBRATION” key on the category menu screen.

KEY OPERATOR PROGRAMS
COPIER MODE	OK

	OTHER FUNCTION	TIMER SETTING
	SETTINGS

	ENABLE/DISABLE	ACCOUNT CONTROL
	SETTINGS

	AUTO COLOR CALIBRATION

1.Select the “AUTO COLOR CALIBRATION” key on the category menu screen.

● The following display will appear.

KEY OPERATOR PROGRAMS

AUTO COLOR CALIBRATION

OK

USE 11"17" PAPER FOR THIS ADJUSTMENT.

PRESS [EXECUTE] TO PRINT THE TEST PATCH.

EXECUTE

2.Press the “EXECUTE” key.

●The copier will print the test patch.

3.After the test patch is printed, place it on the document glass of the copier with 5 white sheets of the same size on top of it and press the “EXECUTE” key again.

●Place the test patch on the document glass as shown in the illustration.

●The copier will start scanning the test patch on the document glass and the adjustment will automatically be made.

BLACK

Place the test patch as shown.

4.Press the “OK” key to exit the program.

● To re-execute the calibration, repeat all the steps.

32

Image 34

Sharp AR-C160 manual Auto Color Calibration, Press the Execute key

Contents

AR-C160 Page Contents Press the Custom Settings key Enter 0 five times using the 10-key pad KEY Operator Code Number KEY Operator Programs KEY Operator Programs Printer KEY Operator Programs optional Enter the key operator code number Using the key operator programsPress the Copier key or the Printer key on Touch panel Press the key of the desired program on the touch panel Select the desired category on the touch panelFollow instructions for the program Account Control Auditing ModePress the OK key to exit the program Press the key to advance through the accounts Number of Copies per AccountPress the upper OK key to exit the program Billing by Account To reset a single account Resetting AccountTo reset all accounts Press the key of an account to be reset To delete accounts Account Number ControlTo register accounts Press the Enter key To print all registered account numbers Price/Copy SettingTo change an account number Press the Print key Similarly enter the prices for price codes #2 to #4 To set a limit Account Limit SettingTo set a limit for all accoounts Account Number Security Toner Save Mode B/W Other Function SettingsExposure Adjustment Adjust the exposure using the and keys Input the number using the 10-key pad Add or Change Extra Preset RatiosSetting a Maximum Number of Copies Use the and keys to set the desired copy ratio Erase Width Adjustment Initial Margin Shift SettingAdjust the value for each side using the and keys To return to the factory default settings Initial Status SettingTo establish new initial settings Press the Return to the Factory Default SETTINGS. key Initial Color Balance Setting Size Setting for Extra Require Key Operator Code Select a paper size for Extra settingSelect a paper tray on the touch panel Stream Feeding Mode Override Sorter Bin Capacity Limit Auto Clear Setting Timer SettingsSleep Mode Setting Enter the time interval using Keys Press the OK key Message Time Setting Preheat Mode SettingSet the time using the and keys Press the OK key Disabling of Auto Tray Switching ENABLE/DISABLE SettingsDisabling of Beep When Keys Touched Disabling of Auto Paper Selection Disabling of Document Feeder Disabling of Bypass-Tray in Duplex CopyDisabling Deletion of Job Programs Disabling of Duplex Copying Disabling of PC/Modem Access Disabling of Covers ModeDisabling of Stapler Disabling of Sleep Mode Disabling of Pre-scan in B/W Copy Program List Printout Other ProgramsTotal Count Press the Copier key Auto Color Calibration Press the Execute key Enable Bypass-Tray Type Detection Enable Bypass-Tray Size DetectionPrinter KEY Operator Programs Prohibit Auto Tray Switching Prohibit Bypass-Tray Selection KEY Operator Assistance Call Sharp Corporation