Preheat Mode Setting, Message Time Setting | Sharp AR-C160 specs

KEY OPERATOR PROGRAMS

Preheat Mode Setting

Preheat mode functions to control the power consumption by lowering the temperature of the fusing unit to a programmed level once a programmed length of time has elapsed without any copier operation after the last copy of a run is made or power is turned on. This function lowers user’s electricity bill, reduces waste of natural resources, and cuts down on environmental pollution. The programmed time is set to 15 minutes for this function on completion of shipment from the factory. The default time can be changed optionally within the prescribed range of time. We suggest you set the most appropriate time according to your usage pattern.

This program is used to set the time that elapses before the copier enters the preheat mode after copying is completed. The interval can be set between 10 and 240 minutes in 1 minute increments.

When the “PREHEAT MODE SETTING” key is pressed, the following display will appear.

KEY OPERATOR PROGRAMS
	PREHEAT MODE SETTING		OK
	SET THE TIME FOR PREHEAT MODE.
	TIME: 15	(10~240)min.

1.Set the desired time interval using the and keys.

2.Press the “OK” key.

Message Time Setting

This program is used to adjust the length of time that messages are displayed in the range of 1 to 12 seconds in 1 second increments. When the “MESSAGE TIME SETTING” key is pressed, the following display will appear.

KEY OPERATOR PROGRAMS
	MESSAGE TIME SETTING			OK
	SET THE TIME FOR MESSAGES.
	TIME:	6 (1~12)sec.

1.Set the time using the and keys.

2.Press the “OK” key.

26

Image 28

Sharp AR-C160 manual Preheat Mode Setting, Message Time Setting, Set the time using the and keys Press the OK key

Contents

AR-C160 Page Contents Press the Custom Settings key Enter 0 five times using the 10-key pad KEY Operator Code Number KEY Operator Programs KEY Operator Programs Printer KEY Operator Programs optional Enter the key operator code number Using the key operator programsPress the Copier key or the Printer key on Touch panel Press the key of the desired program on the touch panel Select the desired category on the touch panelFollow instructions for the program Account Control Auditing ModePress the OK key to exit the program Press the key to advance through the accounts Number of Copies per AccountPress the upper OK key to exit the program Billing by Account Resetting Account To reset all accountsTo reset a single account Press the key of an account to be reset Account Number Control To register accountsTo delete accounts Press the Enter key Price/Copy Setting To change an account numberTo print all registered account numbers Press the Print key Similarly enter the prices for price codes #2 to #4 To set a limit Account Limit SettingTo set a limit for all accoounts Account Number Security Other Function Settings Exposure AdjustmentToner Save Mode B/W Adjust the exposure using the and keys Add or Change Extra Preset Ratios Setting a Maximum Number of CopiesInput the number using the 10-key pad Use the and keys to set the desired copy ratio Erase Width Adjustment Initial Margin Shift SettingAdjust the value for each side using the and keys Initial Status Setting To establish new initial settingsTo return to the factory default settings Press the Return to the Factory Default SETTINGS. key Initial Color Balance Setting Size Setting for Extra Require Key Operator Code Select a paper size for Extra settingSelect a paper tray on the touch panel Stream Feeding Mode Override Sorter Bin Capacity Limit Timer Settings Sleep Mode SettingAuto Clear Setting Enter the time interval using Keys Press the OK key Message Time Setting Preheat Mode SettingSet the time using the and keys Press the OK key ENABLE/DISABLE Settings Disabling of Beep When Keys TouchedDisabling of Auto Tray Switching Disabling of Auto Paper Selection Disabling of Bypass-Tray in Duplex Copy Disabling Deletion of Job ProgramsDisabling of Document Feeder Disabling of Duplex Copying Disabling of PC/Modem Access Disabling of Covers ModeDisabling of Stapler Disabling of Sleep Mode Disabling of Pre-scan in B/W Copy Other Programs Total CountProgram List Printout Press the Copier key Auto Color Calibration Press the Execute key Enable Bypass-Tray Type Detection Enable Bypass-Tray Size DetectionPrinter KEY Operator Programs Prohibit Auto Tray Switching Prohibit Bypass-Tray Selection KEY Operator Assistance Call Sharp Corporation