Initial Margin Shift Setting | Sharp AR-C160 specification

KEY OPERATOR PROGRAMS

Initial Margin Shift Setting

Set the initial margin shift value with this program.

When the “INITIAL MARGIN SHIFT SETTING” key is pressed, the following display will appear.

KEY OPERATOR PROGRAMS
INITIAL MARGIN SHIFT			OK
SETTING			OK
SET THE INITIAL MARGIN SHIFT.
SIDE 1		SIDE 2
1/2	(0~1)	1/2	(0~1)
	inch		inch

1.Adjust the value for each side using the and keys.

●The value can be set from 0" to 1" in 1/8" increments.

●If an optional duplex module (AR-DU2N) is not installed, the value for the reverse side (side 2) is not displayed.

2.Press the “OK” key.

Erase Width Adjustment

Set the initial setting of the amount of the erase area with this program. When the “ERASE WIDTH ADJUSTMENT” key is pressed, the following display will appear.

KEY OPERATOR PROGRAMS
ERASE WIDTH ADJUSTMENT		OK
SET THE INITIAL ERASE WIDTH.
EDGE ERASE	CENTER ERASE
1/2 inch(0~1)	1/2	inch(0~1)

1.Adjust the values for the edge erase and the center

erase respectively using the and keys.

● The values can be set from 0" to 1" in 1/8" increments.

2.Press the “OK” key.

20

Image 22

Sharp AR-C160 Initial Margin Shift Setting, Erase Width Adjustment, Adjust the value for each side using the and keys

Contents

AR-C160 Page Contents Press the Custom Settings key Enter 0 five times using the 10-key pad KEY Operator Code Number KEY Operator Programs KEY Operator Programs Printer KEY Operator Programs optional Enter the key operator code number Using the key operator programsPress the Copier key or the Printer key on Touch panel Press the key of the desired program on the touch panel Select the desired category on the touch panelFollow instructions for the program Account Control Auditing ModePress the OK key to exit the program Press the key to advance through the accounts Number of Copies per AccountPress the upper OK key to exit the program Billing by Account To reset a single account Resetting AccountTo reset all accounts Press the key of an account to be reset To delete accounts Account Number ControlTo register accounts Press the Enter key To print all registered account numbers Price/Copy SettingTo change an account number Press the Print key Similarly enter the prices for price codes #2 to #4 To set a limit Account Limit SettingTo set a limit for all accoounts Account Number Security Toner Save Mode B/W Other Function SettingsExposure Adjustment Adjust the exposure using the and keys Input the number using the 10-key pad Add or Change Extra Preset RatiosSetting a Maximum Number of Copies Use the and keys to set the desired copy ratio Erase Width Adjustment Initial Margin Shift SettingAdjust the value for each side using the and keys To return to the factory default settings Initial Status SettingTo establish new initial settings Press the Return to the Factory Default SETTINGS. key Initial Color Balance Setting Size Setting for Extra Require Key Operator Code Select a paper size for Extra settingSelect a paper tray on the touch panel Stream Feeding Mode Override Sorter Bin Capacity Limit Auto Clear Setting Timer SettingsSleep Mode Setting Enter the time interval using Keys Press the OK key Message Time Setting Preheat Mode SettingSet the time using the and keys Press the OK key Disabling of Auto Tray Switching ENABLE/DISABLE SettingsDisabling of Beep When Keys Touched Disabling of Auto Paper Selection Disabling of Document Feeder Disabling of Bypass-Tray in Duplex CopyDisabling Deletion of Job Programs Disabling of Duplex Copying Disabling of PC/Modem Access Disabling of Covers ModeDisabling of Stapler Disabling of Sleep Mode Disabling of Pre-scan in B/W Copy Program List Printout Other ProgramsTotal Count Press the Copier key Auto Color Calibration Press the Execute key Enable Bypass-Tray Type Detection Enable Bypass-Tray Size DetectionPrinter KEY Operator Programs Prohibit Auto Tray Switching Prohibit Bypass-Tray Selection KEY Operator Assistance Call Sharp Corporation