INSTALL WINDOW PANEL
Installation in a sliding sash window
1 Connect the rain guards to the insect guard net.
Insert all three projections on each rain guard into the holes in the insect guard net. Side “A” will now be at the top, as indicated in the diagram.
2 Attach the guard combined above to the window panel.
Push the insect guard net firmly to ensure that its four projections fit into the holes in the window panel.
Side “A” will now be at the top, as indicated in the diagram, when it is installed in the
"A"
Insect guard net
Hole
Projection 
Rain guard
Window panel
window.
Projection 
"A"
3 Cut the foam seal A (adhesive type) to the proper length and attach it to the window frame.
4 Install the window panel into the win- dow frame.
Make sure that the exhaust cover is attached to the window panel.
Inner height of the window: 21.3" (540mm) - 28.3" (718mm) Use the window panel.
The window panel cannot be installed in windows less than 21.3" (540mm) high, as you will be unable to shut the exhaust cover.
(1)Cut the window panel to the same height as the window.
(2)Open the window sash and place the window panel on the window frame.
(3)Secure the window panel to the window frame with 2 screws.
Foam seal A
Exhaust cover
Window panel
Cut
11.3.22 11:00:14 AM
