Sharp CV-2P10SC operation manual Precautions, Warnings For Use, Warning For Power Supply Cord

Models: CV-2P10SC

1 60
Download 60 pages 26.22 Kb
Page 6
Image 6
PRECAUTIONS

PRECAUTIONS

Points to keep in mind when using your unit.

WARNINGS FOR USE

Install the unit in accordance with the installation instructions in the latter section of this manual.

Do not modify any part of this product.

Do not insert anything into any part of the unit.

Ensure the power supply used has an appropriate voltage rating.

Only use a three-pin grounded electrical AC socket rated 125V, 60Hz, and 15 amps or more.

Use of a power supply with an improper voltage rating can result in damage to the unit and possibly fire.

Always use a fuse with the proper amp rating.

Do not, under any circumstances, use wire, pins or other objects in place of a proper fuse.

In the event of any abnormality with the unit (ex. a burning smell), turn it off imme- diately and disconnect the power supply and contact a Sharp authorized service center.

WARNING FOR POWER SUPPLY CORD

This unit uses a plug with a built-in fuse.

Read the precautions on the plug before using the unit.

Always conduct a “Power Plug Check” before use to confirm the power plug func- tions normally.

This power plug must only be plugged into an appropriate wall socket. Do not use in conjunction with any extension cords.

Push the power plug securely into the socket and make sure it is not loose.

Do not pull, deform, or modify the power supply cord, or immerse it in water. Pulling or misuse of the power supply cord can result in damage to the unit and cause electrical shock.

A damaged power supply cord must be replaced with a new power supply cord obtained from the product manufacturer and not repaired. Replacement must be performed by manufacture's service agent in order to avoid a hazard.

Radio or TV Interference

If this room air conditioner should cause interference to radio or television reception, try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the room air conditioner and radio/TV receiver.

Connect the room air conditioner into an outlet on a circuit different from that to which the radio/TV receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

EN-4

CV-2P10SC_en.indd 4

11.3.22 11:00:11 AM

Page 6
Image 6
Sharp CV-2P10SC operation manual Precautions, Warnings For Use, Warning For Power Supply Cord, Radio or TV Interference