Sharp CV-2P10SC operation manual Warning About Grounding, Usage Cautions

WARNING ABOUT GROUNDING

•Improper use of the grounding plug can result in the risk of electric shock.

This appliance must be grounded. In the event of an electrical short circuit, ground- ing reduces the risk of an electric shock by providing a less resistant conduit for the electric current.

This appliance is equipped with a cord that has a grounding wire connected to a grounding plug. The plug must be plugged into a socket that is properly installed and grounded.

•Do not under any circumstances cut or remove the round grounding pin from this plug.

Consult a qualified electrician or service- man if the grounding instructions are not completely understood, or if in any doubt as to whether the appliance is properly grounded.

If a grounding adapter is used, make sure the electrical box is fully grounded.

3-Pin socket

Grounding pin 3-Pin plug

Grounded electrical box

Grounding adapter

Grounding wire

Tab for grounding

Screw screw

Grounded electri- cal box

ENGLISH

USAGE CAUTIONS

•Be sure to turn the unit off and disconnect the power supply cord before perform- ing any maintenance or cleaning.

•Do not splash or pour water directly onto the unit. Water can cause electrical shock or equipment damage.

•Drainage should be performed whenever moving the unit.

If any water remains in the tank, it may spill out while being moved.

•Remove the window panel in the event of particularly adverse weather. Extremely adverse weather may cause water to leak in through the openings.

•To ensure proper drainage, the drainage hose must have no kinks or be on a dif- ferent level during dehumidification mode.

The drained water may spill out into the room.

•The temperature around the drainage hose must not be below freezing point when used.

Drained water may freeze inside the hose, causing water inside the unit to overflow into the room.

•Do not block the exhaust air outlet with obstacles. Cooling performance may be reduced or stop completely.

•Place the unit on a level surface.

Placing the unit on a level surface to avoid water spilling out into the room.

EN-5

CV-2P10SC_en.indd 5

11.3.22 11:00:12 AM