LOCATION
•The unit should be placed on a firm foundation to minimize noise and vibration. For safe and secure positioning, place the unit on a smooth, level floor strong enough to support the unit. This will also help to avoid water spilling out into the room.
•The unit has casters to aid placement, but it should only be rolled on smooth, flat surfaces. Use caution when rolling on carpet surfaces. Do not attempt to roll the unit over objects.
•The unit must be placed within reach of a properly rated grounded socket.
•Never place any obstacles around the air inlet or out- let of the unit.
•Allow at least 12" (30cm) of space from the wall for efficient
MIN.12"
(30cm)
MIN.12"
(30cm)
MIN.12"
(30cm)
ENGLISH
INCLUDED |
|
|
|
Exhaust hose |
| Rain guard |
|
| 1 |
| 2 |
Window adapter |
| Insect guard net |
|
| 1 |
| 1 |
Bracket |
| Foam seal A |
|
| 1 |
| 1 |
Screw |
| Foam seal B |
|
| 8 | (adhesive type) | 1 |
Window kit |
| Manual |
|
| Window panel |
| 1 |
| Exhaust cover |
|
|
|
| Remote control |
|
|
|
| 1 |
|
| Battery |
|
|
| (AAA.1.5V) | 2 |
Extension panel | Adjustment panel |
| |
|
|
SUGGESTED TOOLS FOR WINDOW PANEL INSTALLATION
1.Screwdriver(medium size Phillips) 2. Tape measure or ruler 3. Knife or scissors
4.Saw (In the event that the window panel needs to be cut down in size because the win- dow is too narrow for direct installation.)
11.3.22 11:00:12 AM