Setup Connections&

Image Projection

Rear Projection

• Place a translucent screen between the projector and the audience.

• Use the projector’s menu screen to reverse the projected image. (See page 42 for use of this function.)

• Optimal image quality can be achieved when the projector is positioned perpendicular to the screen with all feet flat and leveled.

Projection Using a Mirror

• When the distance between the projector and a screen is not sufficient for normal rear projection, you can use a mirror to reflect the image onto the screen.

• Place a mirror (normal flat type) in front of the lens.

• Project the normal image onto the mirror.

• The image reflected from the mirror is projected onto the translucent screen.

CAUTION

• When using a mirror, be sure to carefully position both the projector and the mirror so the light does not shine into the eyes of the audience.

Ceiling-mount Projection

• It is recommended that you use the optional Sharp ceiling-mount bracket for this installation.

• Before mounting the projector, remove the Swivel Stand. (See page 17 for removing and attaching the Swivel Stand.)

• Before mounting the projector, contact your nearest Sharp Authorized Service Center or Dealer to obtain the recommended ceiling-mount bracket (commercially available). (AN-CM260 ceiling-mount bracket, AN-EP101B extension tube for AN-CM260.)

• When the projector is in the inverted position, use the upper edge of the screen as the base line.

• Use the projector’s menu screen to select the appropriate projection mode. (See page 42 for use of this function.)

E-23