Specifications

Appendix

Product type

Projector

Model

DT-200

Video system

PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43

 

DTV 480i/480P/720P/1080i

Display method

DLP chip, RGB optical shutter method

DLP panel

Panel size: 0.55￿

 

Display method: Single Panel Digital Micromirror Device (DMD™) by Texas Instruments

 

Drive method: Digital Light Processing (DLP™)

 

No. of dots: 480,000 dots (800 [H] ￿ 600 [V])

Lens

1–1.2 ￿ zoom lens, F3.0, f=32.5–44.0 mm

Projection lamp

150 W SHP lamp

Video input signal

RCA Connector: VIDEO (INPUT 4), composite video, 1.0 Vp-p, sync negative, 75 Ω

 

terminated

S-video input signal

4-pin Mini DIN connector (INPUT 3)

 

Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated

C(chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated

Component input signal RCA Connector

(INPUT 1) Y: 1.0 Vp-p, sync negative, 75 Ω terminated

 

PB: 0.7 Vp-p, 75 Ω terminated

 

PR: 0.7 Vp-p, 75 Ω terminated

Component input signal

29-pin connector

(INPUT 2)

DVI input signal: Digital 250–1,000 mV 50 Ω

 

Analog 0.7 Vp-p 75 Ω

 

Y: 1.0 Vp-p, sync negative, 75 Ω terminated

 

PB: 0.7 Vp-p, 75 Ω terminated

Component RGB input signal

PR: 0.7 Vp-p, 75 Ω terminated

29-pin connector

(INPUT 2)

RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75 Ω terminated

 

HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)

 

VERTICAL SYNC. SIGNAL: Same as above

Horizontal resolution

520 TV lines (NTSC 3.58 input)

RGB input signal

15-PIN MINI D-SUB CONNECTOR (INPUT 2):

 

RGB separate/composite sync/sync on green type analog input: 0–0.7 Vp-p, positive,

 

75 Ω terminated

 

HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative) or composite sync (Apple only)

Pixel clock

VERTICAL SYNC. SIGNAL: Same as above

12–110 MHz

Vertical frequency

43–75 Hz

Horizontal frequency

15–70 kHz

Rated voltage

AC 100–240 V

Input current

2.1 A

Rated frequency

50/60 Hz

Power consumption

200 W

Heat dissipation

750 BTU/hour

Operating temperature

41°F to 95°F (￿5°C to ￿35°C)

Storage temperature

￿4°F to 140°F (￿20°C to ￿60°C)

Cabinet

Plastic

I/R carrier frequency

38 kHz

Dimensions (approx.)

141⁄2￿ (W) ￿ 69⁄16￿ (H) ￿ 127⁄8￿ (D) (368 ￿ 153.8 ￿ 327 mm) (including swivel stand)

Weight (approx.)

141⁄2￿ (W) ￿ 45⁄8￿ (H) ￿ 127⁄8￿ (D) (368 ￿ 118 ￿ 327 mm) (main body only)

9.5 lbs. (4.3 kg) (including swivel stand)

Supplied accessories

8.4 lbs. (3.8kg) (main body only)

Remote control, Two AA size batteries, Power cord, Video cable, Lens cap (attached on

Replacement parts

the body), Lens cap strap, Operation manual

Lamp unit (Lamp/cage module) (BQC-XVZ90+++1), Remote control (RRMCGA088WJSA),

 

AA size batteries, Power cord (QACCDA007WJPZ), Video cable (QCNWGA001WJZZ),

 

Lens cap (CCAPHA004WJ01), Lens cap strap (UBNDT0013CEZZ), Operation manual

 

(TINS-A287WJZZA)

This SHARP projector uses a DMD chip. This very sophisticated chip

This unit has some inactive pixels within acceptable tolerances which

contains 480,000 pixels. As with any high technology electronic

may result in inactive dots on the picture screen. This will not affect

equipment such as large screen TVs, video systems and video

the picture quality or the life expectancy of the unit. If you have any

cameras, there are certain acceptable tolerances that the equipment

questions about this matter, please call toll free 1-800-BE-SHARP (1-

must conform to.

800-237-4277).

U.S.A. ONLY

 

Specifications are subject to change without notice.

E-53