
Replacing the Lamp
Removing and installing the lamp unit
CAUTION
•Be sure to remove the lamp cage by the handle. Do not touch the glass surface of the lamp cage or the inside of the projector.
•To avoid injury to yourself and damage to the lamp, carefully follow the steps below.
•Replace the lamp after turning off the power and unplugging the power cord.
1 | Turn off the power. | 2 | Unplug the power cord. | 3 | Remove the Swivel |
|
| Stand. (See page 17.) |
Press POWER OFF. Wait until the cooling fan stops running.
Loosen the user service | Slide the lamp cage | Loosen and remove the |
4 screw that secures the | 5 cover in the direction | 6 |
lamp cage cover. | of the arrow. | from the lamp cage. |
|
|
| User service screws |
7 | Remove the lamp cage. | Insert the new lamp cage | Tighten the three- |
| 8 firmly into the lamp cage | 9 securing screws to | |
|
| compartment. | fasten the lamp cage. |
Troubleshooting | Maintenance& | ||
|
|
|
|
|
|
|
|
|
|
|
|