Sharp DT-200 Setting the Video Signal (VIDEO menu only), Selecting a Background Image

Setting the Video Signal (VIDEO menu only)

2,3,4

1, 6

The video input system mode is preset to “Auto”; however, it can be changed to a specific system mode if the selected system mode is not compatible with the connected audiovisual equipment.

1Press MENU. The “Picture” menu screen appears.

2 Press	/	to display the “Options” menu screen.
3 Press	/	to select “Video Systems”, and then
press .
4 Press	/	to select the desired video system
mode.

5Press ENTER to save the setting.

On-screen Display

6To exit the menu screen, press MENU.

•When the system mode is set to “Auto”, you may not receive a clear picture due to signal differences. Should this occur, switch to the video system of the source signal.

•“Auto” cannot be set for PAL-M and PAL-N input signals. Select “PAL-M” or “PAL-N” in “Video Systems” menu for PAL-M and PAL-N input signals.

OperationBasic

E-37

Selecting a Background Image

This function allows you to select the image displayed when no signal is being sent to the projector.

Description of Background Images

	Selected item			Description
	Blue (	)		Blue screen
2,3,4	None (	)		Black screen
2,3,4	1, 5
	1 Press MENU. The “Picture” menu screen appears.
	2 Press		/	to display the “Options” menu screen.
	3 Press		/	to select “Background”.
	4 Press		/	to select the background image you

want to display on the screen.

On-screen Display

5 To exit the menu screen, press MENU.