Using the Operation Buttons
Selecting the Input Signal Source
Press INPUT on the projector, INPUT 1, INPUT 2, INPUT 3, INPUT 4 or DIGITAL INPUT on the remote control to select the desired input mode.
• When no signal is received, “NO SIGNAL” will be displayed. When a signal that the projector is not preset to receive is received, “NOT REG.” will be displayed.
INPUT button | INPUT 1 Mode | INPUT 2 Mode | INPUT 3 Mode | |||
|
|
|
|
|
|
|
DIGITAL Mode | INPUT 4 Mode | |
|
|
|
Adjusting the Picture Aspect Ratio
This function allows you to modify or customize the picture display mode to enhance the input image. Depending on the input signal, you can choose NORMAL, BORDER or STRETCH image.
1 Press RESIZE. Each time RESIZE is pressed, the picture mode changes as shown on the next page.
1
Buttons Operation