Adjusting the Computer and DVD/DTV Images
2,3,4
5
1, 6
Special Modes Adjustment
Ordinarily, the type of input signal is detected and the correct resolution mode is automatically selected. However, for some signals, the optimal resolution mode in “Special Modes” on the “Fine Sync” menu screen may need to be selected to match the computer display mode.
1Press MENU. The “Picture” menu screen appears.
2 Press | / | to display the “Fine Sync” menu |
screen. |
|
|
3 Press | / | to select “Special Modes”, and then |
press . |
| |
4 Press | / | to select the optimal resolution. |
2,3
1, 4
5Press ENTER to save the setting.
6To exit the menu screen, press MENU.
•Avoid displaying computer patterns which repeat every other line (horizontal stripes). (Flickering may occur, making the image hard to see.)
•When inputting DTV 1080i signal, select the corresponding type of signal in step 4 above.
•When inputting 720P RGB signal, select the corresponding type of signal in step 4 above.
•“Special modes” cannot be used in the DIGITAL INPUT mode.
Checking the Input Signal
This function allows you to check the current input signal information.
1Press MENU. The “Picture” menu screen appears.
2 Press | / | to display the “Fine Sync” menu |
screen. |
|
|
3 Press | / | to select “Signal Info” to display the |
current input signal.
4To exit the menu screen, press MENU.
Operation Basic