Adjusting the Picture
Picture Setting Function
1
4 2, 3 
1, 5
This function stores all items set in “Picture”. Five settings can be stored separately in “Memory 1” to “Memory 5”. Each stored setting is reassigned to each input mode (INPUT 1 to INPUT 4 and DIGITAL).
Even when the input mode or signal is changed, you can easily select optimal settings from the stored settings.
•This function can be operated using the PICTURE SETTING button on the projector or on the remote control, as well as the OSD menu screen.
Description of Picture Setting
Selected item | Description |
|
|
Memory | Settings of all items in “Picture” can be stored for |
| the respective input modes. The stored settings |
| can be selected in any input modes. |
Memory | Besides “Memory 1” to “Memory 5”, other settings |
OFF | can be stored for each input mode. “Memory OFF” |
| can be selected for each input mode. |
|
|
Selecting “Memory
1Press PICTURE SETTING, Each time PICTURE SETTING is pressed, the memory number changes as shown below.
Memory 1 |
| Memory 2 |
| Memory 3 |
|
|
Memory OFF
Memory 5
Memory 4
Storing the Adjustment Values for each Memory Number
1Press MENU. The “Picture” menu screen appears.
2Press 
/
to select “Picture Setting”, and then press 
.
3Press 
/
to select the desired memory number for the picture settings.
4Press ENTER to save the settings. Adjust the settings described on pages 29 to 31. The values that are adjusted are stored.
5To exit the menu screen, press MENU.
Operation Basic