Sharp DV-NC70 and DV-NC70X, DV-NC70W operation manual Setting the Mpeg, Setting the Cinema Voice

Press ENTER to confirm the setting.

Press ENTER to confirm the setting.

DVD Setup

Setting the MPEG

•Before setting the “MPEG”, perform the step 1 to 2 on pages 47 and 48.

1 Press ENTER and then use ' or " to select “MPEG”. 2 Press ENTER to display the settings you can select.

BITSTREAM

SELECT

ENTER ENTER RETURN

OPERATE ON/OFFTIMER

ON

DISPLAY SCREEN

DV- NC70W

DV- NC70

DV- NC70X

EJECT

VCR/DVD VCR MENU SELECTOR DVD SETUP

G-CODE

PROG

3 Use ' or " to select “BITSTREAM” or “PCM”.

BITSTREAM: Use this setting for a digital connection of a receiver (amplifier) equipped with an MPEG Audio decoder.

PCM: Use this setting for a digital connection to the PCM digital input jack of a DAT or MD, or for a digital connection to a receiver (amplifier) that does not have an MPEG Audio decoder.

4

5 Press RETURN to exit the SETUP screen and return to normal screen.

•If you want to go on and specify other settings, use ' or " to display the other SETUP screen without pressing RETURN.

When playing a disc recorded using DTS, the bitstream type signal

is output regardless of the setting of “ DIGITAL” and “MPEG”.

Setting the CINEMA VOICE

This function is raising the sound of the center speaker to make the voices in a movie easier to hear.

•Before setting the “CINEMA VOICE” , perform the step 1 and 2 on page 46.

1 Use ' or " to select “CINEMA VOICE”.

2 Press ENTER to display the settings you can select.

AUDIO

CINEMA VOICE

ON

OFF

SELECT

ENTER ENTER RETURN

FUNCTION	PROG/	ANGLE	OPEN/
CONTROL	REPEAT		CLOSE
TITLE			DVD MENU
CLEAR			SET
RETURN			ENTER
			ZERO BACK
			SKIP SEARCH
AM/PM	INPUT SELECT VCR DVD
/
REV			FWD
	PLAY
REC			PAUSE/STILL
	STOP
TAPE	DPSS		SLOW
SPEED	SKIP
CH		AUDIO
	OUTPUT
	VCR	DVD

VCR/DVD COMBINATION

3 Use ' or " to select “ON” or “OFF”.

ON: Set to “ON” when you want to raise the sound of the voice.

OFF: Set to “OFF” when you do not want to use this function.

4

5 When you have completed the setting above, press RETURN to return to the SETUP screen. However, if you want to go on and specify the other settings, use ' or " to display other setting screen.

•The CINEMA VOICE setting raises the sound of the center channel threfore it does not affect the voices in other channels.

•Even if this function is set to “ON”, the result may or may not be effective depending on the disc.

GB 46