Sharp DV-NC70 and DV-NC70X Audio Setting, Setting the Compression Dolby Digital output level

DVD Setup

AUDIO Setting

COMPRESSION	Use this setting for increasing the average
	volume of Dolby Digital audio when playing
	a DVD.
DIGITAL	Use this setting for specifying the type of
	digital output when playing a disc.
CINEMA VOICE	Use the setting for raising the sound of the
	center speaker to make the voices in a
	movie easier to hear.

Setting the COMPRESSION (Dolby Digital output level)

OPERATE ON/OFFTIMER

ON

DISPLAY SCREEN

DV- NC70W

DV- NC70

DV- NC70X

EJECT

VCR/DVD VCR MENU SELECTOR DVD SETUP

G-CODE

PROG

When Dolby Digital is used to record the audio on a DVD disc, the average overall volume level of the audio is relatively lower than that produced by a VIDEO CD/Audio CD. This is to provide the widest possible dynamic range. To counteract this, this product automatically raises the overall average volume level of a disc recorded using Dolby Digital to a level that is similar to that of a VIDEO CD/Audio CD.

COMPRESSION:	COMPRESSION:
OFF	ON

DVD		• Audio level the same
Dolby Digital audio	• Low audio level	as audio CD, etc.

VIDEO CDs

Audio CDs

•OFF .............. Audio level recorded on disc is played back without modification.

•ON ............... Dolby Digital average audio level is increased so it sounds similar to that of a VIDEO CD/Audio CD.

Preparation

•See Preparing to Watching a VCR or a DVD on page 18.

1 Press DVD SETUP to display the SETUP screen.

2 Use ' or " to select the “ AUDIO” and then press ENTER.

AUDIO

COMPRESSION OFF

DIGITAL BITSTREAM

MPEG BITSTREAM

CINEMA VOICE OFF

SELECT

ENTER ENTER RETURN

FUNCTION	PROG/	ANGLE	OPEN/
CONTROL	REPEAT		CLOSE
TITLE			DVD MENU
CLEAR			SET
RETURN			ENTER
			ZERO BACK
			SKIP SEARCH
AM/PM	INPUT SELECT VCR DVD
/
REV			FWD
	PLAY
REC			PAUSE/STILL
	STOP
TAPE	DPSS		SLOW
SPEED	SKIP
CH		AUDIO
	OUTPUT
	VCR	DVD

VCR/DVD COMBINATION

GB 44