Sharp DV-NC70 and DV-NC70X, DV-NC70W operation manual Press / to select Colour

Playback

2 Press ' / " to select “COLOUR”.

	COLOUR
		AUTO		PAL		MESECAM		NTSC
	NTSC				3.58	4.43 PAL TV
	BLUE		BACK				AUTO	OFF
	AUTO		RENTAL				ON	OFF
	REPEAT						ON	OFF
	NICAM						AUTO	OFF
	S.PICTURE						ON	OFF
		:SELECT					:CHANGE
SET:ENTER						MENU:EXIT

3 Press \ / to select “AUTO”, “PAL”, “MESECAM” or “NTSC”.

OPERATE ON/OFFTIMER

ON

DISPLAY SCREEN

DV- NC70W

DV- NC70

DV- NC70X

EJECT

VCR/DVD VCR MENU SELECTOR DVD SETUP

G-CODE

PROG

4 Press SET to confirm and then press VCR MENU to return to the normal screen.

•When the colour mode is set to fixed colour mode while the Product is playing back a black and white tape or is receiving a black and white broadcast, the picture may be coloured. In this event, set the COLOUR mode on the MODE selection screen to “AUTO” mode.

BLUE BACK

This function eliminates monitor noise and mutes sound during playback of unrecorded portions of a tape, and when receiving a non-broadcasting channel. A blue screen will also appear if the Product is set to the Auxiliary input (LINE IN) mode but no video signal is fed to the Product. (The BLUE BACK mode is set to “AUTO” at the factory.)

1 Follow steps 1 to 3 from “AUTO RENTAL” on page 55. 2 Press ' / " to select “BLUE BACK”.

	COLOUR
		AUTO		PAL		MESECAM		NTSC
	NTSC				3.58	4.43 PAL TV
	BLUE		BACK				AUTO	OFF
	AUTO		RENTAL				ON	OFF
	REPEAT						ON	OFF
	NICAM						AUTO	OFF
	S.PICTURE						ON	OFF
		:SELECT					:CHANGE
SET:ENTER						MENU:EXIT

FUNCTION	PROG/	ANGLE	OPEN/
CONTROL	REPEAT		CLOSE
TITLE			DVD MENU
CLEAR			SET
RETURN			ENTER
			ZERO BACK
			SKIP SEARCH
AM/PM	INPUT SELECT VCR DVD
/
REV			FWD
	PLAY
REC			PAUSE/STILL
	STOP
TAPE	DPSS		SLOW
SPEED	SKIP
CH		AUDIO
	OUTPUT
	VCR	DVD

VCR/DVD COMBINATION

3 Press \ / to select “AUTO” or “OFF”.

4 Press SET to confirm and then press VCR MENU to return to the normal screen.

•Blue Back does not function during still picture, variable slow motion and video search.

•Blue Back may not function properly if the broadcast signal is too strong or too weak.

•Blue Back cannot be recorded.

•If the antenna signal is weak while recording a TV programme, or if the input signal is weak while tape dubbing, the monitor screen may turn blue since the Product may not recognize whether or not a proper signal is being received. In this event, set the BLUE BACK mode to “OFF”.

GB 56