45 GB
DVD Setup
3Use ' or " to select “COMPRESSION”.
4Press ENTER to display the settings you can select.
5Use ' or " to select “ON” or “OFF”.
•Use of the “OFF” setting is recommended when the product is
connected to audio equipment.
6Press ENTER to confirm the setting.
•
When you have completed the above setting, press RETURN to
return to the SETUP screen. However, if you want to specify the
“ DIGITAL” setting in succession, proceed to step 1 below.
•Whenever the “COMPRESSION” setting is “ON”, the 3D VIRTUAL
SURROUND setting is automatically changed to “OFF”.
Setting the DOLBY DIGITAL
When playing a disc recorded using Dolby Digital (5.1ch), you can
specify either “BITSTREAM” or “D-PCM” as the digital type output.
•Before setting the “ DIGITAL” , perform the step 1 and 2 on
page 46.
1Use ' or " to select “ DIGITAL”.
2Press ENTER to display the settings you can select.
3Use ' or " to select “BITSTREAM” or “D-PCM”.
BITSTREAM: Use this setting for a digital connection of a
receiver (amplifier) equipped with a Dolby
Digital decoder.
D-PCM: Use this setting for a digital connection to the
(Down Mix PCM) PCM digital input jack of a DAT or MD, or for
a digital connection to a receiver (amplifier)
that does not have a Dolby Digital decoder.
4Press ENTER to confirm the setting.
5When you have completed the setting above, press RETURN to
return to the SETUP screen. However, if you want to go on and
specify the other settings, use ' or " to display other setting
screen.
/
PLAY
STOP
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
CLEAR
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
VCR DVDAM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
ANGLE
PROG
DV- NC70
DV- NC70X
G-CODE
DV- NC70W
AUDIO
COMPRESSION
ON
OFF
ENTER RETURN
SELECT
ENTER
AUDIO
DIGITAL
D-PCM
ENTER RETURN
SELECT
ENTER
BITSTREAM