Sharp DV-NC70 and DV-NC70X, DV-NC70W operation manual Select the speed with

Recording with the Timer

8 Select the speed with ' / ".

			1/2
DATE	PR	START	STOP
15/12 47		12:00PM12:30PM		SP
--/--	--	-:--	-:--	--
--/--	--	-:--	-:--	--
--/--	--	-:--	-:--	--

•SP: Standard Play, LP: Long Play, EP: Extended Play

9 Press SET. To programme additional timer settings, repeat steps 3 through 8.

OPERATE ON/OFFTIMER

ON

DISPLAY SCREEN

DV- NC70W	G-CODE
DV- NC70	PROG
DV- NC70X

EJECT

VCR/DVD VCR MENU

SELECTOR DVD SETUP

1/2

DATE PR START STOP 15/12 47 12:00PM12:30PMSP --/-----:---:----

--/-- -- -:-- -:-- --

--/-- -- -:-- -:-- --

2/2

CLEAR:CANCEL :SELECT

SET:ENTER MENU:EXIT

10 Press VCR MENU to return to the normal screen.

11 To set the product for automatic timer recording, press TIMER ON/OFF and ensure the “ ” lights on the VCR Front Panel display.

VCR

L R

SEPVP D

•If the timer recording is finished, your product will stop and turn off automatically. (In this case the cassette is not ejected.)

If a DVD is being played back, the power will not turn off. (The timer recording is stopped while the power stays on.)

•If the cassette runs out during the timer recording, your product will

eject the cassette without rewinding.

In this case, the timer recording is cancelled (“ ” disappears) and the device turns itself off automatically. However, if a DVD is being played back, the power will not turn off. (The power stays on.)

•If power is interrupted for more than 60 minutes (power failure, etc.), all timer settings will be cancelled.

•If TIMER ON/OFF is pressed when there is no cassette loaded, “ ” flashes for 5 seconds, indicating that timer recording is not possible.

•If TIMER ON/OFF is pressed while a cassette with an uncovered erasure protection hole is loaded, “ ” flashes and the cassette is ejected.

•When “ ” is lit, regular VCR operation, clock setting and setting/ cancelling/confirming timer positions are not possible. For regular VCR

operation, clock setting and setting/cancelling/confirming timer positions, press TIMER ON/OFF to disengage the timer (“ ” disappears), and then turn on your Product.

•During timer recording, the timer cannot be set.

•To terminate timer recording, press ËSTOP during timer recording.

•If the same time is input for the start time and the stop time, the timer setting will be cancelled.

FUNCTION	PROG/	ANGLE	OPEN/
CONTROL	REPEAT		CLOSE
TITLE			DVD MENU

CLEAR	SET
RETURN	ENTER

ZERO BACK

SKIP SEARCH

AM/PM	INPUT SELECT VCR DVD
/
REV		FWD
	PLAY
REC		PAUSE/STILL
	STOP
TAPE	DPSS	SLOW
SPEED	SKIP
CH	AUDIO
	OUTPUT
	VCR	DVD

VCR/DVD COMBINATION

GB 70