Sharp ER-A180 Mode switch and mode keys, Displays, Number of repeats for repetitive registrations

3Mode switch and mode keys

The mode switch can be operated by inserting one of the two supplied mode keys - manager (MA) and operator

(OP) keys. These keys can be inserted or removed only in the “REG” or position”.

MA

OP
OPX/Z	REG
	MGR
	X1/Z1
	X2/Z2
PGM

Manager key (MA)

MA

Operator key (OP)

OP

The mode switch has these settings:

: This mode locks all register operations. (AC power becomes off.) No change occurs to register data.

OP X/Z: To take individual cashier X or Z reports, and to take flash reports. And it can be used to toggle receipt state “ON” and “OFF” by pressing the Ükey.

REG: For entering sales.

PGM: To program various items.

: Enters into the void mode. This mode allows correction after finalizing a transaction.

MGR: For manager's entries. The manager can use this mode for an override entry.

X1/Z1: To take the X/Z report for various daily totals

X2/Z2: To take the X/Z report for periodic (weekly or monthly) consolidation

4Displays

Operator display		Customer display (Pop-up type)
	PLU
	DEPT REPEAT

RCPT
OFF	cashier code

Amount: Appears in the far-right eight (max.) positions. When the amount is minus, the minus symbol “-” appears before the amount.

Number of repeats for repetitive registrations:

The number of repeats is displayed, starting at “2” and incremented with each repeat. When you have registered ten times, the display will show “0.”(2 → 3 ..... 9 → 0 → 1 → 2 ... )

Receipt function status:

The indicator “” appears in the ninth position when the receipt function is in the OFF status.

Time: Appears in the first to fifth positions (using 24-hour format) in the OP X/Z, REG, , or MGR

mode. In the REG, , or MGR mode, press the Ñkey to display the time.

Machine state symbols (appears in the tenth place)

: Appears during programming.

: Appears when an error is detected.

: Appears when the subtotal is displayed or when the amount tendered is smaller than the sale amount.

: Appears when the ekey is pressed to calculate a subtotal in foreign currency.

: Appears when a transaction is finalized by pressing the É, 'or îkey.

: Appears when the change due amount is displayed.

: Appears when the voltage of the installed batteries is under the required level. You must replace them with new ones within two days. Refer to page 37 for details.

: Appears when the batteries are not installed, or the installed batteries are dead. You must replace them with new ones immediately. Refer to page 37 for details.

5