Option menu (Continued)
Adjusting the PC image automatically
Auto sync.
This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available RGB cable, etc.
NOTE
•Auto sync. is likely to succeed when an input PC image has wide vertical stripes (e.g. pattern with high contrast stripes, or
Adjusting the PC image manually
Ordinarily you can easily adjust the picture as necessary to change image position using Auto sync. In some cases, however, manual adjustment is needed to optimise the image.
Selected item | Description |
|
|
Centres the image by moving it to the left or right. | |
|
|
Centres the image by moving it up or down. | |
|
|
Clock | Adjusts when the image fl ickers with vertical |
| stripes. |
|
|
Phase | Adjusts when characters have low contrast or |
| when the image fl ickers. |
|
|
NOTE
•For resetting all “Fine sync.” items to the factory preset values, press a/b to select “Reset”, press ENTER, press a/b to select “Yes”, and then press ENTER.
•Images may not be displayed properly depending on the settings and/or input signals.
HDivX (R) VOD
Please see USB Media Player on page 26.
HDemo (store mode only)
When “Store mode” is set to “On”, after all the settings are completed, the Feature demo screen is displayed if there is no operation for 30 seconds. If you want to have clear picture demo, you must select “Clear picture processing” in the Demo screen.
HSystem data USB data transfer
This function allows you to update the TV to the latest software using a USB device. You must update the software through the USB terminal.
Software update (OAD)
•This function is for automatically download the data for the version update software over digital broadcasts when the “OAD setup” is set to “On”.
•To download, follow the instructions when the download message appears during a digital broadcast.
OAD scan
•This function is for manually download the data for the version update software over digital broadcasts.
CAUTION
•Do not disconnect the AC cord when the software upgrade is in progress, as this may cause the upgrade to fail. If problem arises ask a qualified service personnel before the software upgrade period expires.
15
