ATV/DTV/RADIO buttons
Use the following buttons on the remote control to operate the menu.
CLEAR PIC.
DISPLAY
ATV/DTV
EPG GUIDE INFO RADIO
ATV/DTV: Press to switch between ATV and DTV mode. After switching from ATV or DTV, radio or external input mode to ATV and DTV mode, the TV jumps to the most recently viewed ATV and DTV channel.
RADIO: Press to switch from DTV to radio mode. The TV will jumps to the most recently tuned radio channel.
When you watch the TV for the first time
When the TV powers on for the fi rst time after purchase, perform the auto installation.
ATV (Analogue TV)
You can run the auto installation to set channels automatically.
1To watch the analogue TV, select “ATV” from “Auto installation” in Programme setup menu. (See page 8.)
2After setting the channels, you can select a channel using CHr/s or 0 – 9 on the remote control unit. (See page 6.)
DTV (Digital TV)
When the TV accesses to DTV mode for the fi rst time, you need to run the auto search. To scan all available services in your area, follow the procedures below.
1To watch the DTV broadcasts, select “DTV” from “Auto installation” in Programmme setup menu. (See page 8.)
2After setting the channels, you can select a channel using CHr/s or 0 – 9 on the remote control unit. (See page 6.)
17
