Programme setup (Continued)
Analogue setting
You can reconfi gure the TV channel settings automatically or manually using Auto search, Manual adjust or Programme edit.
HAuto search
You can also automatically search by performing the procedure below. This is the same function as programme auto search in auto installation.
1Press MENU and the MENU screen displays.
2Press c/d to select “
” (Programme setup).
3Press a/b to select “Analogue setting”, and then press ENTER. If you have already set the password, enter it here.
• See page 12 for setting a password.
4Press a/b to select “Auto search”, and then press
ENTER.
You do not need to do anything during the auto search. Press MENU to exit.
HManual adjust
You can set some channel items manually.
1Repeat steps 1 to 3 in Auto search.
2Press a/b to select “Manual adjust”, and then press
ENTER.
3Press a/b to select your desired item, and then press c/d to adjust the settings.
Item | Description |
|
|
Storage to | Save programme to your desired channel |
[1~99] | number. Press R to save. |
|
|
Sound | Select the optimum sound system (Broadcasting |
system | system) to receive. |
| (B/G, D/K, I, M) |
|
|
Colour | Select the optimum colour system to receive. |
system | (PAL, SECAM, NTSC) |
|
|
Current CH | Select the channel you want to edit. |
| • Selected channel will be automatically |
| refl ected in the background. |
|
|
Search | Start searching from current channel. |
| • Instead of pressing c/d to adjust the |
| frequency, you can set by directly entering the |
| frequency number of the channel with |
| 0 — 9. |
| Press R to save. |
|
|
| Tune the frequency of the stored channel to your |
| desired position. |
| • Adjust while checking the background picture |
| as a reference. |
| Press R to save. |
|
|
NOTE
•The frequency shown below the
HProgramme edit
Use this menu to set up a channel individually.
1Repeat steps 1 to 3 in Auto search.
2Press a/b to select “Programme edit”, and then press ENTER.
3Press a/b to select the channel you want to edit, and then press 1 to 5 on the remote control if necessary or press RETURN to exit.
•As you toggle down the channels, each channel is immediately refl ected in the background when you press
ENTER.
1
(Erase programme) Channels can be erased individually. Press 1 to erase the selected channel.
2
(Label)
You can change channel names individually. Maximum 5 alphanumerics can be input. Press 2 to start labelling.
Press a/b/c/d to select a character, and then press 2 again or ENTER to save.
3
(Sort)
Channel positions can be sorted freely.
Press 3 to select the channel you want to move. Press a/b to move it to the desired position, and then press 3 again or ENTER to save.
4
(Skip)
Channels with “Skip” set to “On” are passed over when using CHr/s even if selected while watching the image from the TV.
Press 4 to skip the selected channel. Press 4 again to cancel the skip.
5 
(Lock)
You can block the viewing of any selected channel. Password must be set fi rst to allow “
” to function.
•See page 12 for setting a password.
Press 5 to lock the selected channel. Press 5 again to unlock the locked channel.
9
