Watching TV, Turning on the power | Sharp LC-46G7X specs

Watching TV

Turning on the power

Press POWER on the TV.

•POWER indicator (Green): The TV is on. (After a few seconds, an image appears with sound.)

•After turning the power “ON” by pressing POWER on the TV, you can turn the power ON/OFF by pressing POWER on the remote control.

POWER button

Simple button operations for changing channels

You can change channels in several ways.

Using CHr/son the remote control unit

•Press CHr to increase the channel number.

•Press CHs to decrease the channel number.

NOTE

•CHr/s on the TV operates the same as CHr/son the remote control unit.

POWER indicator

Turning off the power

Press POWER on the remote control.

•The TV enters standby mode and the image on the screen disappears.

•The POWER indicator on the TV changes from green to red.

Press POWER on the TV.

•The POWER indicator on the TV turns off.

•When the TV is turned off by POWER on the TV, you cannot turn on the power by pressing POWER on the remote control.

Using 0 – 9 on the remote control unit

Select the channels directly by pressing buttons 0 to 9.

POWER indicator

Off	Power off

Red	The TV is in standby mode.

Green	The TV is on.

NOTE

•If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.

•Minor power is consumed when the TV is turned off by POWER on the TV.

POWER button

a

To select a 1-digit channel (e.g. channel 2):

• Press 0, followed by 2.

To select a 2-digit channel (e.g. channel 12):

• Press 1, followed by 2.

When viewing Teletext information

View a page directly which is 3-digit page number from 100 to 899 by pressing buttons 0 to 9.

16

Image 18

Sharp LC-46G7X Watching TV, Turning on the power, Simple button operations for changing channels, Turning off the power

Contents

LC-46G7X Page Contents Dear Sharp customer Contents Trademarks Important Safety Precautions Precautions when transporting the TV Supplied accessories Using the remote control unit PreparationInserting the batteries Removing the terminal cover Setting the TVPreparation Insert the cable clamps in the holes on the TV as shown Removing the stand Setting the TV on the wallUsing an optional bracket to mount the TV Before detaching/attaching the stand Removing the speakers Before detaching/attaching the speakersUnit’s speakers can be attached and removed Fixing the TV to the table Protection against overturningAnchoring the TV to the wall or a pillar View from the top Basic connection Connecting to an antennaConnecting to the AC outlet Rear view Game console Camcorder Connecting a VCR, game console or camcorderConnecting a DVD player DVD player When using DVI cable commercially available Preparation Connecting a Digital TV STB Set Top BoxConnecting a PC Digital TV STB TV Front Volume display when headphones are pluggedPart names Regarding the headphone jack TV Rear Part names Remote control unit Watching TV Turning on the powerTurning off the power Simple button operations for changing channels Using Flashback a on the remote control unit Using MPX on the remote control unitWatching TV Time switches as shown below Changing the volumeUsing Mute e on the remote control unit Mute On-Screen Display Basic adjustment settingsMenu operation buttons Example Basic adjustment settings Menu items TV/INPUT1-3 Menu items HDMI/DVIList of menu items to help you with operations Auto installation Programme setupAuto search Programme Setup Manual Adjust menu Basic adjustment settings Manual setting for each channelSearch tuning Fine tuning Colour system Press a/bto select Colour sys., and then press EnterColour system menu Skip menu Setting the child lockSkipping channels Sort menus Basic adjustment settings Erase Programme Erase programme menus AV Mode selection OPC Optical Picture Control setting Picture adjustments Adjustments items Quick Shoot Colour temperatureAdvanced Black Basic adjustment settings Monochrome Film ModeRange of OPC Using Surround on the menu screen Audio adjustmentUsing Surround on the remote control unit Press Surround to switch the Surround function on and off Power Control Power control setting allows you to save energyNo Operation Off Setting a password Useful adjustment settingsPassword setting for child lock for TV input mode Resetting the password Connecting speaker cables Useful adjustment settingsConnecting external speakers External Audio Bypass INPUT5 or INPUT6 you wish to Skip, Then press Enter Input Signal PC input mode onlyInput Skip Press Menu to exit Press c/dto adjust the item to your Auto Sync. adjustment PC input mode onlyFine Sync. adjustment PC input mode only Desired position Image position Adjustments are stored separately according to input sourceInput Label Repeat until the name is fully spelt out Picture aspect ratio Wide Screen Signalling WSSWSS signal 43 screen Mode Panorama Mode Normal Press c/dto select On or Off, and then press Enter Selected item Description Mode1 Standby ModeReset Mode2 Wide mode for TV/AV input mode Manual SelectionAuto Selection Normal Cinema Full Dot by Dot Wide mode for PC input modeInput Signal Full Dot by Dot DNR Digital Noise Reduction Hdmi SetupAudio Only Press a/bto select the desired item, and then press Enter Language setting for on-screen display Colour system settingIdentification Using external equipment Input Select Useful features Teletext function Time display Useful features Displaying SubtitleDisplaying Subpages Subpage screen Press Freeze again to cancel the function Teletext language settingUseful features Freezing images Troubleshooting Problem Possible SolutionAppendix PC Control of the TV RS-232C port specificationsAppendix Communication conditions PC compatibility chart CommandsResponse code format Model LC-46G7X SpecificationsOptional accessories Part name Model number Dimensional drawings Clearing the Password 1300 135 Do not Return this Document to Sharp