28
Basic adjustment settings

Colour temperature

Adjusts the colour temperature to give the best white
image.
Press a/b to select “Colour Temp.”, and
then press ENTER.
Description
White with bluish tone
White with reddish tone
Selected item
High
Mid-High
Middle
Mid-Low
Low
Press a/b to select the desired level, and
then press ENTER.

Black

For easier viewing, change the viewing depth by
selecting a level for automatically adjusting the dark
portion of an image.
Press a/b to select “Black”, and then press
ENTER.
Press c/d to select “On”, and then press
ENTER.
Repeat steps 1 to 3 in Colour temperature.
1
2
3
Colour Temp.
Black
Quick Shoot
3D - Y/C
Monochrome
Film Mode
Range of OPC
On Off
Description
For high detail in black portions
No adjustment
Selected item
On
Off
Press MENU and the MENU screen displays.
1
2
Press c/d to select “Picture”.
3
Press a/b to select “Advanced”, and then
press ENTER.
4
5
Advanced
Advanced setting enables you to set the picture
adjustment in more detail. There are seven options
you can choose from.

3D-Y/C

Provides high quality images with minimal dot crawl
and cross colour noise.
Press a/b to select “3D-Y/C”, and then
press ENTER.
Repeat steps 1 to 3 in Colour temperature.
1
2
3
Press a/b to select the desired level, and
then press ENTER.
NOTE
• 3D-Y/C is not selectable depending on the input signal
type.
• 3D-Y/C may not operate depending on the input signal
type or noisy input signal.
Colour Temp.
Black
Quick Shoot
3D – Y/C
Monochrome
Film Mode
Range of OPC
Standard
Fast
Slow
Description
Normal adjustment
For movie image
For still image
Selected item
Standard
Fast
Slow

Quick Shoot

Use Quick Shoot to view fast-action images more
clearly.
Press a/b to select “Quick Shoot”, and then
press ENTER.
Repeat steps 1 to 3 in Colour temperature.
1
2
Press c/d to select “Advanced”, and then
press ENTER.
3
Description
For obtaining a clear image
Normal image
Selected item
Advanced
Standard
NOTE
• Quick Shoot may cause image noise. If this occurs, set
the function to “Standard”.
• Quick Shoot is not selectable on 50 Hz input signals, e.g.
PAL 50 Hz.
LC-G7X_E-g 06.12.21, 9:01 AM28