34
Useful adjustment settings
Input Skip
This setting allows you to skip the HDMI or DVI input
on the Input Selection operation.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
Press a/b to select “Input Skip”, and then
press ENTER.
1
2
3
Press c/d to select “Yes”, and then press
ENTER.
Press a/b to select the Input (INPUT4,
INPUT5 or INPUT6) you wish to skip, and
then press ENTER.
5
4
INPUT 4 (HDMI1)
INPUT 5 (HDMI2)
INPUT 6 (DVI)
Yes No
6
Press MENU to exit.
3
4
Input Signal (PC input mode only)
• Some input signals may have to be registered manually
to display properly.
• The pairs of input signals (resolutions) in the list below
are not distinguishable when received. In such case, you
have to set the correct signal manually. After setting once,
it will display when the same signal (resolution) is input
again.
Press MENU and the MENU screen displays.
1
Press a/b to select “Input Signal” and then
press ENTER.
Press a/b to select the desired input signal
on the display.
1024 x 768
1360 x 768
(Example)
1360g7681024g768
NOTE
• You can only select the “Input Signal” on the Setup menu
when receiving one of the 2 input signals listed above.
Press c/d to select “Setup”.
2
LC-G7X_E-i 06.12.21, 9:03 AM34