Useful adjustment settings
Auto Sync. adjustment (PC input mode only)
For automatically adjusting the PC image.
1 Press MENU and the MENU screen displays.
2 Press c/dto select “Setup”.
3 | Press a/bto select “Auto Sync.”, and then |
| press ENTER. |
4 Press c/dto select “Yes”, and then press
ENTER.
•Auto Sync. starts and “Adjusting the image” displays.
MENU [Setup ... Auto Sync.]
|
|
|
|
|
|
|
|
|
|
| Yes |
| No |
|
|
|
|
|
|
Fine Sync. adjustment (PC input mode only)
Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, however, manual adjustment is needed to optimize the image.
1 Press MENU and the MENU screen displays.
2 | Press c/dto select “Setup”. | |
3 | Press a/bto select “Fine Sync.”, and then | |
| press ENTER. | |
4 | Press a/bto select the specific | |
| adjustment item. | |
|
|
|
|
|
|
| [ 90] | – |
|
| + | |
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| [ 39] | – |
|
| + | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Clock | [ 90] | – |
|
| + |
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Phase | [ 20] | – |
|
| + |
|
|
|
|
|
|
|
Reset
30%
5 | Press MENU to exit. |
NOTE
•When Auto Sync. is successful, “Auto Sync completed successfully” displays. If not, Auto Sync. failed.
•Auto Sync. may fail even if “Auto Sync completed successfully” displays.
•Auto Sync. may fail if the computer image has low resolution, has unclear (black) edges, or is moved while executing Auto Sync.
•Be sure to connect the PC to the TV and switch it on before starting Auto Sync.
•Auto Sync. can be executed only when inputting analogue signals.
Selected item | Description | |
|
|
|
| Centres the image by moving it to the left | |
| or right. | |
|
| |
|
|
|
| Centres the image by moving it up or | |
| down. | |
|
| |
|
|
|
Clock |
| Adjusts when the image flickers with |
| vertical stripes. | |
|
| |
|
|
|
Phase |
| Adjusts when characters have low contrast |
| or when the image flickers. | |
|
| |
|
|
|
5 | Press c/dto adjust the item to your | |
| desired position. | |
6 | Press MENU to exit. | |
NOTE
•For resetting all adjustment items to the factory preset values, press a/b to select “Reset”, and then press
ENTER.
•“Clock” and “Phase” in the “Fine Sync.” menu can be adjusted only when inputting analogue signals.
35
