Sharp LC-40LE700, LC-52LE700, LC-46LE700 operation manual Color, Sharpness, Mid-Low

On=Screen Display Menu

Adjusts the picture to your preference with the following _icture settings.

Example

Picture]

Automatically adjusts the brightness of the screen.

Off: The brightness is fixed at the value set in "Backlight".

On: Automatically adjusts.

On: Display: Displays the OPC effect on the screen while adjusting the brightness of the screen.

=When set to "On", the Optical Picture Control (OPC)

senses the surrounding light and automatically adjusts the backlight brightness. Make sure nothing obstructs

the OPC sensor, which could affect its ability to sense surrounding light.

=When set to "On: Display", OPC effect displays on the screen while the OPC adjusts the screen brightness.

=When set to "On" or "On: Display", the OPC indicator on the TV lights green.

l FREEZi MENU

1 Press MENU to display the MENU screen, and then press 4/1_ to select "Picture".

2 Press A/V to select a specific adjustment item.

Select "Advanced" and then press ENTER to set "C. MS.-Hue", "C. MS.-Saturation", "C. M.S.-Value",

"Color Temp.", "Fine Motion Enhanced", "Active Contrast", "Gamma Adjustment", "Black Level", "Film Mode", "Digital Noise Reduction", "3D-Y/C", "Monochrome" or "Range of OPC".

3 Press A/T(or	_1/1_) to select the	desired	setting,
and then press	ENTER.
4 Press MENU to exit.
Backlight	The screen dims	The screen
		brightens
Contrast	For less contrast	For more	contrast
Brightness	For less	For more
Color	brightness	brightness
	For less color	For more	color
	intensity	intensity
Tint	Skin tones	Skin tones
	become reddish	become	greenish
Sharpness	For less	For more
	sharpness	sharpness

For resetting all Picture adjustment items to the factory preset values, press h,/T to select "Reset", press ENTER, press 4/1_ to select "Yes", and then press ENTER.

This TV provides various advanced functions for optimizing the picture quality.

©clot tone is managed using the six-color adjustment setting.

C.M.S.-Hue: This is a standard to adjust the color either more reddish or more bluish in tone.

C.M.S.=Saturation: Increases or decreases the saturation of a selected color.

C.M.S.-Value: A higher value makes the image brighter. A lower value makes the image darker.

=For resetting all adjustment items to the factory preset values, press A/T to select "Reset", and then press

ENTER.

For a better white balance, use color temperature

correction.
High:	White	with	bluish tone
Middle:
Mid-High:
Mid-Low:
Low:	White	with	reddish tone

White balance can be adjusted between a maximum of +30 and a minimum of -30 for each color temperature.

R Gain (LO/HI): -30 through +30

G Gain (LO/HI): -30 through +30

B Gain (LO/HI}: -30through +30

=For resetting all adjustment items to the factory preset values, press h,/T to select "Reset", and then press

ENTER.

Q-21