Sharp LC-46LE700, LC-52LE700, LC-40LE700 operation manual On=Screen Display Menu

On=Screen Display Menu

For adjusting a picture's horizontal and vertical position.

H-Pos.: Centers the image by moving it to the left or right.

V-Pos.: Centers the image by moving it up or down.

o For resetting adjustments to the factory preset values, press A/T to select "Reset", and then press ENTER. When connecting a PC to the HDMI terminal, the image position will be automatically adjusted. It cannot be manually adjusted.

The screen position variable ranges depend on the View Mode or the signal type. The ranges can be seen on the position-setting screen.

Adjustments are stored separately according to input

SOUrCe.

You can also select a language from the Setup menu. Select from among 3 languages: English, French and Spanish.

When this function is set to "On", the LED on the front of the TV turns on.

"On" is the factory preset value. If you want to turn off the LED, set the function to "Off".

If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values.

1 "Return to the factory preset values" displays on the screen.

o If you have already set the Secret No., input the 4-digit secret number here.

2 Select "Yes".

o "Now, TV will restart automatically. OK?" displays on the screen.

3 Select "Yes".

o "Now initializing..." displays on the screen and blinks. After the reset has been completed, the power shuts off and then comes back on. The screen will have returned to its original settings.

The Channel Setup settings will not be changed. The Language settings will not be changed.

The Secret number settings will not be changed. The TV Location settings will not be changed.

Allows you to use a secret number to protect certain settings from being accidentally changed.

iMPORTANT:

Three conditions must be met to enable the V-Chip (see

pages 26 to 27):

1.Secret No. is registered.

2.V-Chip/V-Chip (DTV Only) settings have been made.

®The "V-Chip(D_/Only)" will only be selectablewhen a new rating systemcarl be downloaded via digital broadcasting in the U.S.

3."Status" is set to "On".

== New Secret No.

You can set and change the secret number by using 0-9.

Input Secret No.: When you change the secret number,

enter the old 4-digit secret number here. The cursor moves to "New Secret No.".

New Secret No.: When you set the new secret number, enter the new 4-digit secret number here. The cursor moves to "Reconfirm".

Reconfirm: Enter the same 4-digit number you set in "New Secret No.".

Secret No. Clear

You can clear your secret number.

Yes: Your secret number is cleared.

No: Your secret number is not cleared.

As a precautionary measure, make a note of your secret number and keep it in a familiar place.

If the secret number is cleared, the Status setting

automatically sets to "Off". "V-Chip" and "Status" will not be selectable from the menu.

Used to enable or disable the parental control function. This function will not be selectable from the menu if

you do not first configure your secret number. On: Enables ParentalCTRL.

Off: DisablesParentalCTRL.

Q- 25