Sharp LC-52LE700 Appendix, Hanging on the wall, LC=40LET00UN, AN-37AG2 + AN-37P30, AN-52AG4

Appendix

• Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal.

Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.

Before attaching/detaching the stand

,,Before performing work, make sure to turn off the TV.

Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.

12

					o
y--::	_}		, _	c--	/
Unfasten the	four	screws	used	to	secure the stand in	Detach the stand from the TV. (Hold the stand so it
place.						will not drop from the edge of the base area.)

To attach the stand, perform the above steps in reverse order.

LC=40LET00UN

This TV should be mounted on the wall with both the AN=37AG2 (SHARP} wall mount bracket and the AN=37P30 (SHARP} attachment of the wall mount bracket. The TV cannot be mounted when with only the AN-37AG2 wall mount bracket. The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.

LC=46LET00UN/LC=52LET00U N

This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP}. The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.

Installing the TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.

Using an optional bracket to mount the TV

You can ask a qualified service professional about using an optional AN-37AG2 or AN-52AG4 bracket to mount the TV on the wall.

Carefully read the instructions that come with the bracket before beginning work.

Hanging on the wall

AN-37AG2 or AN-52AG4 wall mount bracket.

(See the bracket instructions for details.)

Vertical mounting Angular mounting

About setting the TV angJe

AN-37AG2 + AN-37P30

0js/_0/_s/20o LC=40LET00UN

•The center of the display:

1 9/e4inches (29.05 mm) under the "B" position.

AN-52AG4

LC=46LET00U N

•The center of the display:

_/_6inch (1,2 mm) under the "b" position.

LC=52LET00U N

•The center of the display:

_/64inch (1.75 mm) under the "b" position.

•Refer to the operation manual of AN-37AG2/AN-37P30 or AN-52AG4 for details.

Detach the cable clamp on the rear of the TV when using the optional mount bracket.

Due to the terminal configuration on this TV, when you wall-mount this model, make sure there is enough space between the wall and the TV for the cables.

To use this TV mounted on a wall, remove the covers at the 4 locations on the rear of the TV, and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.

Q- 53