Sharp LC-60LE857EN 3D glasses AN-3DG40, sold separately, Caring for the front panel, Introduction

Models: LC-80LE857E LC-70LE857E LC-80LE857EN LC-80LE857KN LC-60LE857E LC-60LE857EN LC-80LE858E LC-70LE858E LC-60LE858E LC-70LE857RU LC-70LE857EN LC-70LE857KN LC-60LE857RU LC-60LE855KN LC-80LE857RU LC-60LE855E

1 94
Download 94 pages 33.14 Kb
Page 5
Image 5
Caring for the front panel

Introduction

Caring for the front panel

Turn off the main power and unplug the AC cord from the wall outlet before handling.

Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.). To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the front panel.

Wiping with a hard cloth or using strong force may scratch the surface of the front panel.

Use a soft damp cloth to gently wipe the front panel when it is really dirty (It may scratch the surface of the front panel when wiped strongly).

If the front panel is dusty, use an anti-static brush, which is commercially available, to clean it.

WARNING

To prevent the spread of fire, keep candles or other open flames away from this product at all times.

3D glasses (AN-3DG40, sold separately)

Prevention of accidental ingestion

Keep the accessory out of the reach of small children. Small children can accidentally swallow these parts.

If a child accidentally swallows any of these parts, seek immediate medical attention.

Do not disassemble

Do not disassemble or modify the 3D glasses except when recycling the batteries. Do not modify the 3D glasses.

Caution for lithium battery

Batteries must not be exposed to excessive heat such as direct sunlight or fire.

Replace only with the same or equivalent type of battery. The battery may explode if improperly replaced.

Take care not to reverse the battery poles (+ and –) when loading the battery. Follow the correct procedure when loading the battery. Loading the battery incorrectly may damage the battery or cause it to leak battery fluid, which could result in a fire, injury or damage.

Handling the 3D glasses

Do not drop, exert pressure on, or step on the 3D glasses. Doing so may damage the glass section, which may result in injury.

Be careful not to trap your finger in the hinge section of the 3D glasses. Doing so may result in injury.

Pay special attention when children are using this product.

Using the 3D glasses

Do not drop, exert pressure on, or step on the 3D glasses. Doing so may damage the glass section, which may result in the risk of injury.

Use the 3D glasses only for the specified purpose.

Do not move around while wearing the 3D glasses. The surrounding area appears dark, which may result in falling or other accidents that may cause injury.

Caring for the 3D glasses

Use only the cloth provided with the 3D glasses to clean the lenses. Remove dust and soil from the cloth. Any dust or other soiling on the cloth may result in scratches. Do not use solvents such as benzene or thinners as doing so may damage the coating.

When cleaning the 3D glasses, take care not to allow water or other fluids to come into contact with the glasses.

Always store the 3D glasses in the case provided when not in use.

When storing the 3D glasses, avoid very humid or hot locations.

Viewing 3D images

If you experience dizziness, nausea, or other discomfort while viewing 3D images, discontinue use and rest your eyes.

Do not use the 3D glasses if they are cracked or broken.

3D glasses (AN-3DG40, sold separately)Prevention of accidental ingestion 3

Page 5
Image 5
Sharp LC-60LE857EN 3D glasses AN-3DG40, sold separately, Caring for the front panel, Prevention of accidental ingestion