Sharp LL-T1610W Connecting a USB device, Turning the power off, Downstream 2 ports

Connecting the monitor and turning the monitor on and off

Information about the ColorSync profile (MacOS)

About the ColorSync profile

ColorSync is the Apple Corporation's color manage- ment system and is a function that enables color resolution to be realized when used with a compat- ible application. A ColorSync profile describes the color characteristics of the LCD monitor.

Notes:

•This monitor's ColorSync profile works with MacOS8.5 or above.

•When using the ColorSync profile, please set the [WHITE BALANCE] to [STD] and the [COLOR MODE] to [OFF].

Setting up the ColorSync profile

Notes:

•A floppy disk drive is necessary. In addition, it is necessary to have PC Exchange or File Exchange installed in your system.

•Depending on the type of computer or OS, command names and methods may differ. Please follow the computer’s own operation manual while reading this.

1.Place the Utility Disk (provided) into the computer’s floppy disk drive.

2.Copy the profile to be used from the Mac folder on the Utility Disk to the ColorSync profile folder located within the system folder.

3.Using the ColorSync on the control panel, choose the profile to be used.

Connecting a USB device

This monitor is manufactured to work with a bus-powered hub that is compatible with the USB standard (based on Rev.1.1).

Downstream (2 ports)

A USB device for currents of up to 100mA can be connected. (Devices that exceed 100mA and USB hubs with bus-powered specifications cannot be connected.)

Upstream (1 port)

A USB compatible computers or USB hub with self- powered specifications is connected here. (USB hubs with bus-powered specifications cannot be con- nected.)

Notes:

•Before connecting, ensure that the shape of the USB cable connector is correct.

•For information regarding the USB function (such as set-up) please refer to the operation manual of the computer to be connected.

•Some computers, OS and other devices may not be able to be activated. To ascertain a certain device's USB compatibility, please contact the manufacturer of the device.

1.Remove the rear cover and the stand cover.

To remove them follow steps 1 and 2 of Connecting the monitor to a power source on page 12.

2.Plug the USB cable (provided) into the monitor's USB upstream port.

3.Connect the second USB cable (provided) to the computer or the USB downstream port.

Turning the power off

1.Turn the computer off.

2.Press the monitor's power button. The Power LED will disappear.

If the monitor is not going to be used for a long period of time, be sure to unplug it from the AC outlet.

USB upstream port

USB cable (provided)

Run through hole

To the computer or another USB hub's downstream port

16