Sharp MD-MT888H -Checking Displays-

01/8/30 4.fm

39

MD-MT888H

Useful Features

-Checking Displays-

„To check the elapsed time and remain-

ing time of the track

Whilst the playback or the playback is paused,

hold down the DISP button for 1 second or

more.

Each time the button is pressed, the display will change

as follows.

Notes:

zIf the disc name or the track name was not originally

recorded on the MiniDisc, "NoNAME" will be dis-

played.

zElapsed playback time and remaining playback time

may be different from the actual time.

„Checking the remaining amount of bat-

tery level

The remaining amount of battery level is shown by the

battery indicator ( ) during operation.

zWhen the battery is completely discharged, the bat-

tery indicator will flash. Recharge the battery or

replace the alkaline battery with a new one.

zWhen the battery has run out completely, "LoBATT"

will appear. Then, the power will be disconnected

automatically.

Notes:

zIf you use the battery which you stopped charging

halfway, " " may appear. It does not mean that the

battery is completely charged.

zThe battery indicator will not correctly display the

remaining capacity for approximately 20 seconds after

the power has been turned on.

zWhen the AC adaptor or a separately available car

adaptor is used, the battery indicator will not be

shown.

zThe number of bars shown in the battery indicator may

increase or decrease, depending on the operation

being performed. This is normal.

Track name Elapsed playback time

Remaining playback time

Contents

Main PORTABLE MINIDISC RECORDER MODEL MD-MT888H OPERATION MANUAL -Accessories- Accessories -Contents- Contents -Special Notes- Special Notes Warnings Caution -Special Notes- Notes -Precautions- Precautions Important Storing the unit Names of Controls and Indicators Names of Controls and Indicators (continued) Menu button operation Menu display -Using with the Rechargeable Battery- Using with the Rechargeable Battery Charging 1 2 3 -Using with the Rechargeable Battery- Display of remaining amount of battery Charging time Refresh -Using with the AC Adaptor- Using with the AC Adaptor 1 2 3 -Using with the Alkaline Battery/Inserting a MiniDisc- Using with the Alkaline Battery Inserting a MiniDisc 1 2 3 1 2 3 Page Page -Long Time Recording and Group Recording- Long Time Recording and Group Recording Long time recording Group recording Setting the group mode To cancel the group mode Group Playback Playback of group-recorded MD Setting the group mode To cancel the group mode Page 1 2 3 4 5 Recording (continued) To interrupt recording To stop recording To update the recorded contents of the MiniDisc Recording level Adding tracks to an existing group About the TOC 6 1 2 3 Page -Playback- 3-colour indicators 1 into the unit. 2 3 ward . Playback (continued) Volume control Bass control To search a desired group 1 Advanced Playback To locate the desired portion To locate the beginning of a track Advanced Playback (continued) Random play or repeat play Intro play To return to normal playback To play at double speed 1 or to select "F(FAST)" and press it. "F(FAST)" and press it. Advanced Recording Long-play recording 1 MODE button repeatedly to select the re- cording mode. 2 01/8/30 4.fm Advanced Recording (continued) About ATRAC About the recording mode Caution for 4 times long recording (LP4) To create your own track numbers Recording tracks as a single track 1 press the M button. Advanced Recording (continued) About track numbers Page Recording from a Microphone To interrupt recording To stop recording To write recorded contents on the MiniDisc 5 Recording from a Microphone (continued) Sound-actuated recording (Mic Syn- chronised recording) 1 2 3 1 4 -Checking Displays- Checking Displays To check the remaining recording time and the total playing time Whilst in the stop mode, hold down the DISP button for 1 second or more. To display the playing time of an indi- vidual track 1 -Checking Displays- To check the elapsed time and remain- ing time of the track Whilst the playback or the playback is paused, hold down the DISP button for 1 second or more. Checking the remaining amount of bat- tery level -Titling a MiniDisc- Titling a MiniDisc Creating a disc name 1 5 6 7 8 Page -Titling a MiniDisc- Titling a MiniDisc (continued) 3 To erase a character To add characters To enter a space Editing a Recorded MiniDisc To erase one track at a time 6 To erase all of the tracks at once 1 Page To combine tracks 1 combined and move the M button toward to pause it. or to select "E(EDIT)" and press it. 3 5 6 1 Erasing a group 1 Stamping titles from another MiniDisc Before stamping 2 6 Operation of the MiniDisc for stamping Creating a group before recording 7 8 Moving non-group tracks to after group-recorded tracks Erasing group information -Hold Function- Hold Function -Changing Default Settings- Changing Default Settings 1 2 5 -Changing Default Settings- Beep sound Auto play Auto power save What is auto power save function? Listening through Another System Listening through a stereo system Listening through a car stereo -Other Features and Caution- Other Features and Caution Resuming auto play Rechargeable battery -Troubleshooting- Troubleshooting -Troubleshooting- If trouble occurs Moisture condensation To remove condensation: -MiniDisc System Limitations- MiniDisc System Limitations -Error Messages- Error Messages Number or symbol appears in (*) position. -Error Messages- Error Messages (continued) Number or symbol appears in (*) position. -Error Messages/Maintenance- Maintenance Cleaning -Specifications- Specifications -Specifications- TERMS OF GUARANTEE SHARP ELECTRONICS (U.K.) LTD. SHARP CORPORATION