Sharp MD-MT888H „ Creating a group before recording, Operation of the MiniDisc for stamping

Operation of the MiniDisc for stamping

7 Load a MiniDisc for stamp- ing.

8 Press the M button.

The unit will finish recording the character information and enter the stop mode.

Note:

If the total number of tracks on the master MiniDisc does not match that on the MiniDisc for stamping, the unit will display "Can'tE" and turn off the power.

If this happens, adjust the total number of tracks on the newly recorded MiniDisc using the edit operation.

zComplete the operation within 25 seconds whilst se- lecting the menus.

zIf you press the CLEAR button during the operation, the previous display appears.

zTo cancel the operation, move the M button toward

.

MD-MT888H

„Creating a group before recording

You can create a group in advance and record tracks in it.

1 Whilst in the stop mode, press the M button. The unit enters the menu select mode.

2 Move the M button toward

	or	to select			AdvancedFeatures RecordedaEditingMiniDisc-
Even if you create a group using the GROUP RESERVE
	"G(GROUP)" and press it.
3	Move the M button toward		or	to select
	"R(GrRESERVE)" and press it.
4	The unit will enter the character input mode.
	Enter the group name (page
	40, steps 4 - 7).
5	Otherwise, you will not be able to create a group.
	Hold down the M button for 1 second or more.
	The created group name will be displayed.
Note:
function, it will not be played if no track is recorded in it.					-

(Group name will not be displayed either.) To check the contents of the group, refer to "To search a desired group (page 24)".

To record in the created group:

Refer to "Adding tracks to an existing group (page 21)".

49

01/8/30 5.fm