Sharp MD-MT99C Titling a MiniDisc continued, E-35, „To add characters, Before stamping, English

Models: MD-MT99C

1 101
Download 101 pages 44.98 Kb
Page 36
Image 36
Titling a MiniDisc (continued)

Titling a MiniDisc (continued)

Advanced Features

-Titling a MiniDisc-

To add characters

1Put the unit in the character input mode. (Perform steps 1 - 2 on page 33.)

2Press the VOL+ or VOL- button to move the cur-

sor to the character before which you want to add a new character.

3Select the character to add. (Perform steps 3 - 4 on page 33.)

4Press the ENTER/SYNC button.

5Press the EDIT button.

6"TOC" will be displayed. To write the updated

contents to the MiniDisc, press the „To add characters/:OFF but- ton.

You cannot remove the MiniDisc whilst "TOC" is displayed. "TOC" will not disappear until the record- ed contents have been updated.

Stamping titles from another MiniDisc

Before stamping

When there are 2 MiniDiscs on which the same tracks are recorded, you can transfer the character information (disc and track names) of the Master MiniDisc to another MiniDisc (for stamping).

1. What is a master MiniDisc?

A recordable MiniDisc that contains tracks and charac- ter information. (You cannot transfer the information from a playback-only MiniDisc.)

2. What is a MiniDisc for stamping?

A MiniDisc that contains the same tracks in the same order as the master MiniDisc. (Make sure that the total number of tracks of the master MiniDisc and the one for stamping are the same.)

E-35

ENGLISH

Page 36
Image 36
Sharp MD-MT99C Titling a MiniDisc continued, E-35, „To add characters, „Stamping titles from another MiniDisc, English