Sharp MD-MT99C E-36, Advanced Features, Titlinga MiniDisc, English, Master MiniDisc operation

Models: MD-MT99C

1 101
Download 101 pages 44.98 Kb
Page 37
Image 37
Master MiniDisc operation

Master MiniDisc operation

1 Insert a Master MiniDisc.

Do not mistake the Master MiniDisc for the target one.

2 Whilst in the stop mode, press the EDIT button to select "NAME STAMP".

3 Press the ENTER/SYNC button.

To cancel the operation, press the Operation of the MiniDisc for stamping/:OFF button.

4 Press the ENTER/SYNC button again.

5 When the unit displays "CHANGE MD", remove the master MiniDisc.

Remove it without turning off the power. Or, the opera- tion will be cancelled.

Operation of the MiniDisc for stamping

6 Load a MiniDisc for stamping.

7 Press the ENTER/SYNC button.

The unit will finish recording the character information and enter the stop mode.

Note:

If the total number of tracks on the master MiniDisc does not match that on the MiniDisc for stamping, the unit will display "Can'tSTAMP" and turn off the power.

If this happens, adjust the total number of tracks on the newly recorded MiniDisc using the edit operation.

MD-MT99C

Advanced Features

-Titling a MiniDisc-

ENGLISH

E-36

Page 37
Image 37
Sharp MD-MT99C operation manual E-36, Advanced Features, Titlinga MiniDisc, English, Master MiniDisc operation