Sharp MX-B401 Touch the Special Modes key, Touch the Erase key, Selecting A Special Mode

SELECTING A SPECIAL MODE

The procedure for selecting a special mode for fax is explained below.

The settings that must be selected vary for each special mode, however, the general procedure is the same. The procedure for erasing shadows at the edges of the image when sending a fax is explained below as an example.

The side to be scanned must be face up! 1 Place the originals.

When using the document glass, place the original with the side to be scanned face down.

Scan Internet Fax Fax USB Mem. Scan PC Scan

Address Book Original Scan: 8½x11 Send: Auto

Direct TX		Exposure		Auto
Sub Address	Resolution		Standard
Address Review	Special Modes
	(1)
File

Quick File

Auto Reception

Fax Memory:100%

2 Select settings in the touch panel.

(1)Touch the [Special Modes] key.

Fax/Special Modes						OK
			(2)
	Program		Erase	Timer
				Slow Scan		1
	Card Shot		Job			2
			Build	Mode
				Business
	File	Quick File
				Card Scan
	Transaction			Own Name
	Report			Select
					(4)
Fax/Special Modes						OK
Erase				Cancel		OK

Edge

Erase	Edge
		3/4
			(0~1)
			inch

Side Erase

(3)

(2)Touch the [Erase] key.

The erase settings will be configured to erase a width of 3/4" around the edges of the original.

(3)Set the erasure width to

3/4" with the keys.

The erase area is set to "Edge Erase" by default.

A particular side can be erased by touching the [Side Erase] key and selecting settings for that side.

(4)Touch the [OK] key.

90