Connecting Peripheral Equipment

This section describes the terminals of the monitor.

Be sure to set the main power switch to “OFF (O)” (see page 21) and disconnect the plug from the power outlet (see page 17) before connecting or disconnecting the cables.

Digital connection with a PC (Input mode: DIGITAL)

A PC screen can be displayed with the PC digital RGB (DVI-D) input terminal.

•Connect to the digital RGB output terminal on your PC using a digital signal (DVI) cable (commercially available).

*Connection with computers that have an output terminal (DVI-D 24 pin or DVI-I 29 pin) conforming to DVI is possible. (However, images may not display properly depending on the computer.)

•Connect with an audio output terminal on your computer using a PC audio cable (commercially available).

•Select the input mode “DIGITAL” for this connection. (See page 22.)

▼Rear view

Output terminals on

PC digital RGB input terminal

PC audio input terminal

connected equipment

 

Audio

Digital RGB

 

Digital signal (DVI) cable (commercially available)

PC audio cable (commercially available)

• See page 56 for compatible signal timing.

E12