Remote Control Unit

Generally the monitor is operated using the remote control unit.

POWER

Turns on/off the power of the monitor (see page 21).

INPUT (Input mode selection)

Each time you press this button, the mode changes in the following order (see page 8):

• DIGITAL ➞ ANALOG ➞ COMPONENT ➞ VIDEO ➞ DIGITAL...

*If the remote control is not available, you can change the mode by pressing the input switch on the front panel of the monitor with a sharp object (see page 8).

MUTE

Turns off the volume temporarily.

Press the MUTE button again to turn the sound back to the previous level.

MENU

Displays and turns off the menu screen (see page 23).

VOL +/- (Volume adjustment)

Pressing or displays the VOLUME menu when the menu screen is not displayed.

V O L U M E

15

Press to increase the volume, and to decrease the volume.

* If you do not press any buttons for about 4 seconds, the VOLUME menu automatically disappears.

Sound is muted when volume is set to “0”.

BRIGHT +/- (Backlight adjustment)

Pressing or displays the BRIGHT menu when the menu screen is not displayed.

B R I G H T

15

Press to increase the brightness of the screen, and to decrease the brightness of the screen.

*If you do not press any buttons for about 4 seconds, the BRIGHT menu automatically disappears.

SIZE (Screen size selection)

Each time you press this button, the screen size changes in the following order (see page 34):

• WIDE ➞ ZOOM 1 ➞ ZOOM 2 ➞ NORMAL ➞ Dot by Dot ➞ WIDE...

MODE (Screen mode selection)

Each time you press this button, the screen mode changes in the following order:

• STD (Standard) ➞ OFFICE (Power saving mode) ➞ VIVID ➞ STD...

DISPLAY

Displays monitor status such as SIZE (screen size), MODE (screen mode), BRIGHT (backlight adjustment), VOLUME, ID No., model name, serial No. and so on. The display disappears when you press this button again, or it disappears automatically after approximately 4 seconds.

E22