Sharp PN-655U ■Enlarge, ■Dual screen display

■Dual screen display

You can display the screens of the PC input signal (ANALOG/DIGITAL) and AV input signal (COMPONENT/VIDEO) simultaneously.

Set this function with “PIP MODES” in the MODE SELECT 3 menu. (See page 32.)

•The currently selected input signal is displayed on the main screen.

•You cannot simultaneously display the screens of signals of the same type, such as two types of PC input signals or two types of AV input signals. The screens of one of the PC input signals and one of the AV input signals can be displayed simultaneously.

	PIP			PbyP			PbyP2
Example			Example			Example
	Main screen
				Main	Sub		Main screen	Sub
		Sub
				screen	screen			screen
		screen
A sub screen is displayed			A main screen and a sub			A main screen of the SXGA size
inside a main screen.			screen are displayed side			(1280 x 1024) and a sub screen
			by side.*			are displayed side by side.

*If “COMPONENT” is selected for the main screen in PbyP mode and 1080i video signals are input, the image quality cannot be changed by adjusting the value of “SHARPNESS” from the VIDEO ADJUSTMENT menu.

■Enlarge

You can set up 4, 9, or 16 monitors and integrate them into a single large screen to display video. Each monitor displays an enlargement of 1/4, 1/9, or 1/16 of the original image.

•Using PC digital RGB input/output terminals, up to 4 monitors can be daisy-chained. (See page 18.)

•To connect 9 or 16 monitors to integrate a screen, a separate video signal splitter (commercially available) is required.

4 screen monitor set-up			9 screen monitor set-up
	0		1			0	1	2
0	1		0	1	2
			3	4	5	3	4	5
2	3		6	7	8
	2		3			6	7	8
16 screen monitor set-up
	0	1	2		3
	4	5	6		7
	8	9	10		11
	12	13	14		15

ENGLISH

33 E