Connection with AV equipment (Input mode: VIDEO)

•Connect to equipment that has a video output terminal using a video (BNC) cable (commercially available).

•Connect with audio output terminals using an audio (RCA) cable (commercially available).

•Select the input mode “VIDEO” for this connection. (See page 22.)

▼Rear view

ENGLISH

Output terminals on

Composite video

Audio input

connected equipment

input terminal

terminals

 

 

Audio

Video

 

 

Right Left

 

 

 

 

 

(Red:

(White:

Video (BNC) cable

(Red:

(White:

Right)

Left)

(commercially available)

Right)

Left)

 

 

Audio (RCA) cable (commercially available)

• The video input terminal of the monitor is compatible with the NTSC (3.58 MHz) video input.

Audio output terminals (See page 9.)

•Audio from the equipment connected to the audio input terminals or PC audio input terminal is output. Connect to the audio input terminals of the connected equipment using an audio (RCA) cable (commercially available) or a PC audio cable (commercially available).

•The audio output varies depending on the input mode selection:

When the input mode is “DIGITAL” or “ANALOG”, the audio from the PC audio input terminal is output.

When the input mode is “COMPONENT” or “VIDEO”, the audio from the audio input terminals is output.

•The output volume is set to the value controlled with the volume adjustment. (See page 22.)

PC digital RGB (DVI-D) output terminal (See page 9.)

The video from the PC digital RGB (DVI-D) input terminal can be output to external equipment. Use this terminal to connect multiple units in a daisy chain using digital signal (DVI) cables (commercially available). Refer to page 18 for a connection example.

RS-232C input/output terminals (See page 9.)

Use these terminals to connect to a PC using an RS-232C straight cable(s) (commercially available) and to control a monitor (or monitors) externally. For connection examples and more information, refer to pages 19, 37, and 38.

15 E