Turning Power On/Off
Before turning on power, make sure that peripherals, external speakers, and the power cord are connected properly.
There are two power supply switches: The main power switch on the rear of the monitor, and the POWER button on the remote control unit.
If the monitor is connected to a PC or a playback device, turn on the monitor first before turning on the PC or playback device.
Main power switch
When the main power switch is off, the monitor is not turned on with the POWER button on the remote control unit.
▼Rear view
Set the main power switch on the rear of the monitor to the “ON ()” position.
Main power switch
(“ON ()” position)
ENGLISH
Turning power on/off using remote control
▼Remote control unit
Press the POWER button to turn the power ON/OFF.
Power “On”: Power LED lights up green.
Power “Off”: Power LED lights up orange. (Standby mode)
The OFF TIMER function also activates standby mode. (See page 31.)
▼ Front view
Power LED
When switching the main power switch or the POWER button off and back on, always wait for at least 5 seconds. Rapid switching may result in a malfunction.
•When the input mode (see page 22) is set to “DIGITAL” or “ANALOG” and there is no video signal input, the backlight of the monitor is turned off and the monitor enters input signal waiting mode. (The power LED flashes green.) If the monitor is in this mode and you press the POWER button on the remote control unit, the monitor enters standby mode.
•If the remote control is not available, you can turn on/off by pressing the power switch
beside the power LED with a sharp object (see page 8).
21 E