Sharp R-33STD Stop KEY, Setting the Clock, Example, Press the 1 MIN key five times Key once

R-33STD English 10/12/2002 15:19 Page 7

STOP KEY

Use of the STOP key:

1.Erasing a mistake during programming.

2. Stopping the oven temporaily during cooking.

3.Cancelling a programme during cooking by pressing the STOP key twice.

SETTING THE CLOCK

There are two setting modes: 12 hour clock and 24 hour clock.

1.To set the 12 hour clock, press the clock key once will appear in the display.

2.To set the 24 hour clock, press the clock key twice will appear in the display.

To set the clock, follow the example below.

Example:

To set the 24 hour clock to 23:35

1. Choose the 24-hour clock	2. Set the hours:
by pressing the CLOCK	Press the 10 MIN key twice.
key twice.	Press the 1 MIN key three times.

	x2
		x2	x3
4. Set the minutes:		5. Start the clock by
Press the 10 MIN key three times.		pressing the CLOCK
Press the 1 MIN key five times.		key once.

x1

x3 x5

NOTE:

x1

x2

3.Change from hours to minutes by pressing the CLOCK key once.

x1

Check the display

1. Press the STOP key if you make a mistake during		occurs during cooking, the programme will be
programming.		erased. The time of day will also be erased.
2. If the electrical power supply to your microwave		3. When you want to reset the time of day, follow the
oven is interrupted, the display will intermittently		above example again.
show	after the power is reinstated. If this

ENGLISH

7