9
BEFORE OPERATING
Touch the Stop/Clear pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.

TO SET THE CLOCK

•Suppose you want to enter the correct time of day
12:30 (A.M. or P.M.).
PROCEDURE DISPLAY
1
2
3

STOP/CLEAR

12:30
12:30
Touch Clock pad.
Touch Clock pad again.
Enter the correct time
of day by touching the
numbers in sequence.

1 2 3 0

Clock
Clock
TIME OF
DAY
ENTER
This is a 12 hour clock. If you attempt to enter an
incorrect clock time, will appear in the display.
Touch the Stop/Clear pad and re-enter the time.
•If the electrical power supply to your microwave
oven should be interrupted, the display will inter-
mittently show
SHARP SIMPLY THE BEST
. PRESS CLEAR AND PRESS CLOCK
after
the power is reinstated. If this occurs during cook-
ing, the program will be erased. The time of day will
also be erased. Simply touch Stop/Clear pad and
reset the clock for the correct time of day.
NOTE:
Your oven can be programmed with the
door open except for Start/Touch On and
Minute Plus.
ERROR
•Before operating your new microwave oven make
sure you read and understand this operation
manual completely.
•Before the oven can be used, follow these
procedures:
1.Plug in the oven. Close the door. The oven display
will show
SHARP SIMPLY THE BEST PRESS
. CLEAR AND PRESS CLOCK
.
2.Touch the Stop/Clear pad.
will appear.
3.Set clock.
: