Sharp R-959(SL)M-AA manual Troubleshooting Chart, Query, Answer

		TROUBLESHOOTING
TROUBLESHOOTING CHART
	QUERY			ANSWER
Draught circulates around			When the oven is working, air circulates within the cavity.
the door.			The door does not form an airtight seal so air may escape from the door.
Condensation forms in			The oven cavity will normally be colder than the food being cooked, and so
the oven, and may drip			steam produced when cooking will condense on the colder surface.
from the door.			The amount of steam produced depends on the water content of the food
			being cooked. Some foods, such as potatoes have a high moisture content.
			Condensation trapped in the door glass should clear after a few hours.
Flashing or arcing from			Arcing will occur when a metallic object comes into close proximity to the
within the cavity when			oven cavity during cooking.This may possibly roughen the surface of the cavity,
cooking.			but would not otherwise damage the oven.
Arcing potatoes.			Ensure all “eyes” are removed from the potatoes and that they have been
			pierced, place directly onto the turntable or in a heat resistant flan dish or
			similar.
The display is lit but the			Check the door is closed properly.
control panel will not
work when pressed.
Oven cooks too slowly.			Ensure correct power level has been selected.
Oven makes a noise.			The microwave energy pulses ON and OFF during cooking/defrosting.
Outer cabinet is hot.			The cabinet may become warm to the touch - keep children away.
The display shows			Your oven may be set in Demo Mode.To cancel Demo Mode, unplug the oven
message for “DEMO			from the socket and replug.
MODE”, or the time in
the display is counting
down very rapidly.

R-959(SL)M-AA.indb 37

37

2/13/13 2:50:13 PM