Sharp SD-AT1000W Connecting speaker wires, Supplied FM aerial, Supplied AM loop aerial

"Connecting speaker wires

Make sure to leave the AC power lead disconnected when connecting the speakers.

To prevent accidental short circuit between and terminals, connect the speaker wires to the speakers first then to the unit.

1 Connect the wires to the speakers.

Speaker terminals

Red

Tube

Label

Black

2 Connect the other end to the main unit.

Label
Speaker plug	Plug in with the rising
	side facing up.

Caution:

!The supplied speakers are exclusively for SD-AT1000W. Do not connect them to other equipment, and do not connect other speakers to SD- AT1000W. It may cause malfunction.

!Do not mistake the and , and right and left terminals of the speaker leads. (The right speaker is placed on the right when you face the unit.)

!Do not let the bare speaker wires touch each other.

!Do not stand or sit on the speakers. You may be injured.

!Insert the speaker plug fully with the rising side facing up.

!Hold the speaker plug when removing it from the main unit.

Pulling the lead may cause malfunction to the unit.

Incorrect

			SD-AT1000W(LAG) TINSZA121AWZZ
Aerial connection				SD-AT1000W
				ENGLISH
Supplied FM aerial:		FM aerial	AM loop
Connect the FM aerial wire to the FM 75 OHMS
socket and position the FM aerial wire in the di-			aerial
rection where the strongest signal can be re-
ceived.
Supplied AM loop aerial:		Black
Connect the AM loop aerial wire to the AM and
GND terminals. Position the AM loop aerial for			White
optimum reception. Place the AM loop aerial on
a shelf, etc., or attach it to a stand or a wall with
screws (not supplied).
Notes:					-
				connectionsSystem	connectionSpeaker/ Aerial connection
External FM aerial
! Placing the aerial on the unit or near the AC power lead may cause noise pickup.
Place the aerial away from the unit for better reception.
! When static is still heard even after adjusting the position of the AM loop aerial, try
reversing the wire connections.
Installing the AM loop aerial:
< Assembling >	< Attaching to the wall >
	Wall	Screws (not supplied)
External FM or AM aerial:
Use an external FM or AM aerial if you require better reception. Consult your dealer.
When using an external AM aerial, be sure to keep the wire of the AM loop aerial
connected.
	External AM aerial				-
	15 m (49 feet)
7.5 m (25 feet)
Earth rod	Earth wire

AM loop aerial

3

1

2

3

4

5

6

7

8

E-10

04/7/21 SD-AT1000W_LAG_E2.fm TINSZA121AWZZ